Search results

  1. G

    Filthy tractors versus clean ones

    I pressure wash them when I have to work on them. I wash out the radiator and oil cooler fairly frequently due to the fact it gets very hot in South Texas. Other than that maybe every 2 or 3 years.
  2. G

    L48tlb-hst

    Thanks for the info, wish my L48TLB ran like my L3010HST it is very smooth and quiet. Thanks again
  3. G

    L48tlb-hst

    The noise is only going forward middle range. It does seem to go a little faster in reverse but close to the forward speed. Also has a fresh filters and hydraulic change all Kubota. Thanks for the response.
  4. G

    L48tlb-hst

    My L48TLB-HST, when I am in middle range going forward it makes a rather loud whinning noise but doesn't effect the forward speed, Middle range going in reverse or low and high range either forward or reverse it doesn't make the noise. Hydraulic level is ok. Just wondering if this could be a...
  5. G

    South Texas summer temps.

    My post was just a FYI of my experience, coolant temp. normal, radiator and oil cooler clean, ref. engineers I spent 33.5 years at a lignite fired power plant, dealt with engineers on a regular basis. I would say they got it right about half the time.
  6. G

    South Texas summer temps.

    This past winter I put sudt2 in my L48TLB, worked fine till summer got here. 100+ amb. temps it lost a lot of power. Went to my my semi local Kubota dealer which is 60 miles away an bought standard UDT. The dealership doesn't stock sudt2 due to our local temps, and the issues the customers were...
  7. G

    South Texas summer temps.

    I have a 2004 L48TLB HST. South Texas summer temps are normally 100 degrees plus. What would be the best Trans/Hyd fluid for such high temps. Thanks
  8. G

    Kubota L2550 Backhoe Attachment

    I had a woods 3pt backhoe on my L3010 HST. It worked fine, but the thought of me cracking my rear-end was to much. I sold the 3PT and bought a L48TLB. In South Texas all we have is mesquite trees, brush and prickly pear, and everything that grows down here has thorns. Forgot lots of rattle snakes.
  9. G

    L48, Hydraulic brush cutter

    They make some low flow hydraulic brush cutter that require 8 to 16 gpm. Will those also not work? This would be used on the farm mainly to clear white brush on the roads at the farm. It would not be cutting anything heavy. Thank You Garry
  10. G

    L48, Hydraulic brush cutter

    Hello, I have a 2004 L48 TLB with a hydraulic remote on the front loader, will this setup handle a low flow 48 to 60 inch hydraulic brush cutter. Thanks Garry
Top Bottom