Search results

The white boards you see are solid PVC The siding in vinyl siding The cupola white pieces you see are solid PVC with copper roof 2nd floor windows are vinyl wrapped Anderson I should add the home will be the same, maintenance free exterior.

I should add, every surface on the outside of the garage is maintenance free. I’m too old (67) to be wasting time painting and maintaining The outside of the building.

The home will have 2 attached garages. Double car for my wife and a 41x40 garage with 10’6” doors with 14’ ceiling! The first floor has 12’ ceilings with 8’ doors… My wife bought 24 acres that was land locked behind out behind our Maine home. We live in Ohio, but I thought about 2 months...

Just finished our 42x48 deep garage. 2x6 construction with trusses, center storage area upstairs, 42x16 deep with 8’ clear. Put in a 34”x34” hole in upstairs floor for an electric winch to haul items up and down. Garage door openings are 10’6” Floor is minimum 5” thick concrete, 42x20’ deep...

R&R Trailer

Anyone?

I have ordered some tie down points to add to the trailer. I’m going to figure out where I want them, how I want them oriented and drill/tap holes in the aluminum block and take them to a friend that has a very large fabrication company and have one of his crack welders weld the blocks to my...

Phew…got the two 3/8” holes on each side completed. I had to elongate one bottom hole on each side (see the blue circles on the side screens) with my mill. I used an end mill. I decided that instead of drilling two more holes (and being further frustrated) for the bottom screen to anchor...

Kubota doesn’t have a snow blower that attaches to the 805 loader. Does any other vendor have one that attaches to the 805?

I have those…from my mill….and used them. Good suggestion.

My drill press is a bench top. The holes to be drilled are marked on the inside. Once I get break through I was able to flip the guard over and get after it with the 3/8” drill. That was able to spit out nice pieces of steel.

That could be the problem. I am usually machining aluminum…not steel.

I got two out of 4 holes drilled through. I still have two to go. I have broke more 1/8” drills than I can count. I have ordered some more drills (1/8 carbide and 3/8” tool steel) from McMaster Carr and will have them Monday. The 1/8th drill is first to get a hole opened that the 3/8th can...

This is what I have…

Good points. I will have to ask about trailer contents. my trailer is insured and I have Kabota tractor insurance. I will contact my agent (good friend) about what my trailer insurance covers ( i think only the trailer).

New tractor, R4 tires, not loaded to best of my knowledge.

Would help to know where you are located…

I have an aluminum 16’ trailer, max load 5820 lbs. I need to move my L3560LE 800 miles to our new home. Can I comfortably put the tractor on the trailer with the bucket removed and haul it that distance? I can’t afford to let the trailer nor tractor trashed. Thoughts?