I just purchased a plow for my B7500 today. Since my tractor doesn't have hydraulics for anything besides the HST part of it I am looking for what I am missing. Thanks in advance
RZB 2019 snow plow for a B7500 manual/help needed
- Thread starter zieg85
- Start date
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
See post #1 for a block to install on a similar tractor as you have. You may read through the whole thread to see if someone states it fits your tractor since I can’t confirm that it fits your tractor. I know it did fit on my similar vintage L185F.
Anyway you can see if your tractor has a similar block somewhere to replace the cover on.
www.orangetractortalks.com
Anyway you can see if your tractor has a similar block somewhere to replace the cover on.
B7100 Hydraulic block diverter (70060-00360 or 70070-00385)
Back in stock. CDN$40 plus actual shipping These are obsolete and no longer available. I have recently been contacted by a member asking if I will make him one of these after reading how I made mine. I know this comes up from time to time and would like to gauge the interest others might have...
www.orangetractortalks.com
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
I have everything mounted up successfully. I needed some metric bolts but all good now. Which port off the block is in and what is out? I haven't been able to secure a manual yet. Parts needed should arrive tomorrow and it looks like I am going to need 2 new hoses.
