Lifes little issues

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
15,984
5,711
113
SW Pa
Have you ever been mowing, you know in the zone, enjoying the sun and warm breeze, mulching up those pretty but pesky leaves? And you make your next round, and what is that laying on the ground? And you get closer and you see one of your blades laying in the sunshine, like it is some kind of nude beach. And after several naughty words, dismount, slowly cause nothing works to good any more. Then you start searching, and hope against hope that you can find all the parts. No such luck for the hero of this tail I fear, crawling around in the mulched grass and leaves, searching but to no avail.
Ahh well I did get to go for breakfast at the truck stop and spend 100.00 bucks on ORD (6.19)fuel. So its not a total waste and Murphy's has the parts, after a cup of coffee I am off. And maybe I ll get to see the new BX,,,, lmao
 
  • Like
  • Wow
Reactions: 5 users

Shawn T. W

Well-known member

Equipment
'05 L5030 HSTC - '21 MF GC 1725 MB - '18 JD Z960M Z-Trak
Dec 9, 2024
874
1,584
93
SW Missouri Ozarks
It can usually always be worse! šŸ˜‚

I bought a $400 metal detector to find a $50 wrench ... But since then I've found a bunch of other things, just because I have it!
 
  • Like
Reactions: 3 users

cliffboyer

Active member

Equipment
L3301 w/LA525 loader, G5200 mower w/RC48 deck, Kawasaki 610 Mule, DR mower
Nov 30, 2017
292
92
28
Southern IL
About 3 years ago I was dragging the chain harrow all around the 1 acre yard with the SXS to knock down mole runs. Got done and noticed the hitch pin & 5/8 draw bar pin gone. How the draw bar stayed in the receiver is beyond me. Guess the downward pull of harrow provided just enough friction to keep it in place.

I did find the hitch pin, but not the 5/8 draw pin.....not yet anyway. I think about it every time I mow.
 
  • Like
Reactions: 1 user