Implement storage WIP

GrumpyFarmer

Well-known member
Lifetime Member

Equipment
B2650, MX6000, Ford 8N, (BX sold)
Sep 13, 2021
3,622
5,310
113
Ohio
That’s an awesome set up…

some of those implements look like they sit back past the posts/shelf above them…how setting them that far back? Is it a camera angle or are you nosing them back in with loader or forks or something?
 

trikepilot

Well-known member

Equipment
B2620HSD LA364/BH65 48SQ Bush Hog LP FDR1660 LP RB1560 B2672 42in forks LP1266
Jul 18, 2020
220
308
63
Hardy, VA
Pretty sweet setup. Well thought out to boot.

But I never get a heavy 3pt implement on perfectly with only tractor positioning - there always some "persuasion" with a digging bar and plenty of cursing. I'm 6'5" and can't see getting into those lower bays to coax a flail or box blade or tiller into alignment.

All my implements that "move" (mowers, hyd front blade, grapple) live under a roof but all the others (rear blade, box blade, forks) live out in the wild exposed to the elements. But I am considering another structure for storage as I quickly used up my 20x30 shed.

Here is what I came up with for the box blade to make it easy peasy to hook up to the three pt arms. I can literally do it with 1 finger as 100% of the 370# weight is supported and it can pivot in 360deg to accommodate however I back in the tractor.

20260228_121925.jpg 20260228_121914.jpg
20260308_122815.jpg
 
  • Like
Reactions: 3 users

biketopia

Well-known member

Equipment
B2650, RK 60" BB, 42" tiller, 72" LP FM, Forks, Grapple, FEL
Feb 15, 2024
458
496
63
Warrenton VA
Pretty sweet setup. Well thought out to boot.

But I never get a heavy 3pt implement on perfectly with only tractor positioning - there always some "persuasion" with a digging bar and plenty of cursing. I'm 6'5" and can't see getting into those lower bays to coax a flail or box blade or tiller into alignment.

All my implements that "move" (mowers, hyd front blade, grapple) live under a roof but all the others (rear blade, box blade, forks) live out in the wild exposed to the elements. But I am considering another structure for storage as I quickly used up my 20x30 shed.

Here is what I came up with for the box blade to make it easy peasy to hook up to the three pt arms. I can literally do it with 1 finger as 100% of the 370# weight is supported and it can pivot in 360deg to accommodate however I back in the tractor.

View attachment 181931 View attachment 181932
View attachment 181933
Quick hitch and hydraulic top link; I never get off the machine to hook up a 3-point unless there's a drive shaft involved. The swinging box blade is a nifty solution! Love OP's setup, I have a few pallet racks I'm thinking of setting up to do something similar with.
 
  • Like
Reactions: 1 user

timber and wine

Member
Premium Member

Equipment
L4802, loader, forks
Nov 1, 2026
35
29
18
NE WI
@GrumpyFarmer There was a post here recently where someone had a quick hitch mounted on a SSQA plate so they could attach it to the loader and move implements around quickly. That is an excellent idea and would go great with the "implement cubbies".

@trikepilot Great idea! I could use a chain fall on a large beam in the workshop... now I just need to get that loader mounted quick hitch.

This forum is going to cost me a fortune!
 

Shawn T. W

Well-known member

Equipment
'05 L5030 HSTC - '21 MF GC 1725 MB - '18 JD Z960M Z-Trak
Dec 9, 2024
917
1,638
93
SW Missouri Ozarks
Quick hitch and hydraulic top and side links make it quite easy ...

Same idea as the backhoe ... Which is basically a three legged stool with hydraulic adjustable legs, and one of them you can swing side to side to line everything up ...