B2650 exhaust

[dmax28]

New to the site. So I have a 2015 b2650 with loader and backhoe. Got 24 hours on it and the exhaust makes the loader arm black with soot already. Anything I can do to the exhaust to redirect away from the arm?

 

[coachgeo]

Post a pic of the area with Soot Patenia. You may have other issues like your lugging her too much, something amiss or maybe it's just break in.

 

[dmax28]

Been running it at 2100 rpm for break in and been using the backhoe for stump removal and clering land. It's not much soot. But just enough to notice it. Might just put a little 90 elbow and angle it down not sure

 

[ItBmine]

My B2620 get's it too. Always gives a puff when it starts. I just wash it off once in a while.

 

[rkidd]

I have a new b2650 also. I am a retired heavy equipment operator 38 years. I know enough to never lug a diesel engine. Mine does the same thing. I think a lot of it is like the other person said the little puff when you first start it. Mine is in a heated garage and I always hit the glow plugs for several seconds. Plus it is diesel exhaust coming out now matter how clean they run there will be some soot.

 

[dmax28]

Anyone know what size the exhaust pipe is?

 

[tempforce]

put a measuring tape across the exhaust outlet. then you can go to a parts store or muffler shop and get a pipe. i wouldn't aim it at the ground. especially if the grass is dry...

 

[jb62901]

Get a chrome drain pipe 1 1/2" elbow.

 

[85Hokie]

Get a chrome drain pipe 1 1/2" elbow. View attachment 19456

Jb,

where ya find such a nice "piece of pipe?"

 

[Humblebub]

My 2370 does the same. If it bothers me I just squirt some simple green on it and wipe if off. It does not bother me much as I only noticed it at 100 hours.

 

[kjb]

I posted on a similar problem, but my concern was the fumes coming back at the operator. Got some good advice and ended up converting to vertical exhaust for around $50. Different tractor, but probably similar setup. http://www.orangetractortalks.com/forums/showthread.php?t=21899

 

[jb62901]

Got it at Lowes plumbing dept cut it to your liking. Ame it any point you like. 2-3 bucks an hose clamp.

 

[85Hokie]

Got it at Lowes plumbing dept cut it to your liking. Ame it any point you like. 2-3 bucks an hose clamp.

Thank you for the idea and place of purchase!

 

[dmax28]

Anyone make a vertical pipe on a b2650.
Was thinking about putting a 90 elbow to the ground

 

[jd0140]

this is what i did seems to help. i would get it all over the back of the snowblower. muffler shop made it.