Winkeye's latest activity
-
Winkeye replied to the thread 2023 L3302 no crank.Hey I know you’re right. I don’t even want to go through it. However I have studied the parts breakdown and schematics. That is helping... -
Winkeye replied to the thread 2023 L3302 no crank.Thanks to everyone for the help. I am just learning farm life and tractor talk hope this thanks everyone. 2023 L3302 Nocrank = Bad crimp...
-
Winkeye replied to the thread 2023 L3302 no crank.I got it fixed. Started right up. The wire from the starter relay unit to the starter was a bad crimp on the started end. 50/50 contact...
-
Winkeye replied to the thread 2023 L3302 no crank.I got it fixed. Started right up. The wire from the starter relay unit to the starter was a bad crimp on the started end. 50/50 contact...
-
Winkeye replied to the thread 2023 L3302 no crank.Hey I know you’re right. I don’t even want to go through it. However I have studied the parts breakdown and schematics. That is helping...
-
Winkeye replied to the thread 2023 L3302 no crank.Hey I know you’re right. I don’t even want to go through it. However I have studied the parts breakdown and schematics. That is helping...
-
Winkeye replied to the thread 2023 L3302 no crank.I found the Main ECU. Square behind the steering wheel under the rear bonnet. Has the pins in and receives the safety control signals? I...
-
Winkeye replied to the thread 2023 L3302 no crank.Yes i have the WSM and it is helpful. I will try the jumper on the starter. I am leaning toward a relay under the rear bonnet. Thanks...
-
Winkeye replied to the thread 2023 L3302 no crank.I agree. However its out in the boonies. I only have one tractor, so i am trying to fix it or else i have to find a transport etc...
-
Winkeye replied to the thread 2023 L3302 no crank.Do you know where the Main ECU is located on the tractor. I can verify the wiring from the pin out on the Main ECU?
-
Winkeye replied to the thread 2023 L3302 no crank.Thanks for the reply and your time. I have checked them at least 2 times. I agree this is the likely issue. i have searched the topic...
-
My L3302 with 40 hours won't turn over. I have checked the battery, Ground, fuses, main and slow blow, Seat, pto, hydrostatic control...