Rdrcr's latest activity
-
RRdrcr replied to the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results....We’re shipping out the last of the ‘original’ L2501 Turbo Kits next week. Folks that have opted for the new ‘updated’ L2501 Turbo Kits...
-
RRdrcr replied to the thread D1703 engine.When you remove the shims and advance the injection pump timing it does inject fuel sooner. I’ve witnessed this on the dyno when...
-
RRdrcr replied to the thread D1703 engine.I’d estimate 32HP. Watch your EGT’s closely while you’re pushing the tractor with heavy loads. They can elevate quickly. If you’re...
-
RWhat you did should have just changed the timing drastically. And how does it start and run? Does it smoke like a train? Does it knock...
-
RRdrcr reacted to Runs With Scissors's post in the thread Pressure washing - do’s and don’ts? with
Like.
As @Old Machinist suggests….I would also advise using caution if using more than “standard hose pressure” on anything that appears to... -
RPressure washing around bearing can force water into bearings
-
RKeep your distance. DO NOT SPRAY OIL COOLER OR RADIATOR!
-
RThe stickers, especially those on the loader and any LP implements, do not hold up to pressure washing in my experience. I would avoid...
-
RThanks all! My L2502 delivered yesterday. I've got some fill dirt and gravel being delivered in a couple days so I can regrade the trail...
-
RRdrcr reacted to whitetiger's post in the thread Is anyone Monitoring Their Hydrostatic Oil Temps During the Past Few yrs of Elevated Summer Temps? with Like.
But it was on the inter-web!!!!!
-
RRdrcr reacted to North Idaho Wolfman's post in the thread Is anyone Monitoring Their Hydrostatic Oil Temps During the Past Few yrs of Elevated Summer Temps? with Like.
Another someone has been reading and relying on AI answers. :unsure:
-
RRdrcr reacted to The Evil Twin's post in the thread Is anyone Monitoring Their Hydrostatic Oil Temps During the Past Few yrs of Elevated Summer Temps? with Like.
Sounds like internet scare tactics. I’d like to see some real world data on temperatures above 140 “cutting the life in half”. Call me...
-
RRdrcr replied to the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results....^^^^^ Not yet but, we hope to get it on the schedule soon. Mike
-
RRdrcr reacted to cthomas's post in the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results... with Like.
Hopefully its a turbo for a LX2610......
-
RRdrcr replied to the thread L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results....Very very good eye. Excellent observation! I was wondering if someone was going to catch that detail in the picture. :) Mike