hedgerow's latest activity
-
Hhedgerow replied to the thread A Tanksinker.Over the years I have built and cleaned out a few what we call farm ponds in this area. Around here we call the bank system that holds...
-
Hhedgerow replied to the thread That's a bad day.A few years ago a son of a buddy of mine in my home town bought some lots with old house's on them and they were cleaning up and hauling...
-
Hhedgerow replied to the thread 1952 Massey Harris Pony - Value Question.I wouldn't take that tractor to a consignment auction. In my area at auction that tractor would bring scrap value. I wouldn't power wash...
-
Hhedgerow replied to the thread Cushman turf truckster with a Kubota D950.I had two liquid cooled Cushman truckster's years ago one had the Kubota diesel and the other was a gas engine. Both of them didn't turn...
-
Hhedgerow replied to the thread Warm or cold grease.I don't do a lot of greasing in the winter but when I do the piece of equipment I am greasing and my cordless gun has been in the warm...
-
Hhedgerow replied to the thread Zero turn sprayer.The first SP sprayer I had was a Hagie with a front mount boom. It was nice to see the boom but you always had solution on the machine...
-
Hhedgerow replied to the thread m5140 - would like to add front 3 function for grapple - lots of ?'s.I have put thousands of hours on a tractor with a grapple hauling and stacking round hay bales and just always used the rear remotes to...
-
Hhedgerow replied to the thread 3rd function, remotes, and top and tilt.Over the years I have used a lot of hose protector from Surplus Center in Lincoln Nebraska. One stock number I carry at the farm is...
-
Hhedgerow replied to the thread L275 alternator not charging. Diagnose & overhaul questions.I have used DB electrical for a number of years mostly for starters and alternators for odd ball equipment like I needed a starter for a...
-
Hhedgerow replied to the thread Flakey third function solenoid.If it were me I would take that scotch lock out and cut and strip the wires and solder them together and use a heat shrink tube over the...
-
Hhedgerow replied to the thread Rental 3 pt. Auger Question.If he was a little closer to me I could set him up with a nice large hedge post to hang that gate on. We can't seem to buy treated post...
-
Hhedgerow replied to the thread Rental 3 pt. Auger Question.You shouldn't have a PTO shaft issue. I ran a heavy duty three point post hole digger for years on a lot of different tractors and never...
-
Hhedgerow replied to the thread L5030 w/V2403....to rebuild engine or not rebuild engine......If I was only going to use it 50 hrs a year I wouldn't worry about the engine. Sounds like it starts good and runs good I would just use it.
-
Hhedgerow replied to the thread L5030 w/V2403....to rebuild engine or not rebuild engine......If it was me I would have pulled it apart while I had the head off and fixed the cylinders, shaft and pump then . Now that its back...
-
Hhedgerow replied to the thread Vehicle windshield wiper blades?.I have run Bosch ICON for years and really like them and they seem to last.