GeoHorn's latest activity

  • GeoHorn
    GeoHorn replied to the thread Stabil wins, hands down..
    MARINE STABIL (green) was properly installed into the full fuel tanks of my pontoon boat with a 180-hour Yamaha F150…and it sat for one...
  • GeoHorn
    GeoHorn reacted to emac's post in the thread how much extra work did I cause? with Like Like.
    Success! After about 100 times of trying to slip the shaft into place, I got out the borescope and looked in. The coupler had come loose...
  • GeoHorn
    All those filters are available on Amazon. It may be that someone has improperly attempted to mimic large diesel engines by reducing...
  • GeoHorn
    My Finish Mower has both…. belt-driven blades…and a shear-bolt such as shown above by Russell.
  • GeoHorn
    As mentioned above that is a 'Roll Pin'. Finish mowers don't really need a shear pin or clutch arrangement. The blades are belt...
  • GeoHorn
    GeoHorn reacted to Tim98TA's post in the thread Excessive 'dieseling' with Like Like.
    Well it did help it some sooooo there's that!!
  • GeoHorn
    GeoHorn replied to the thread Excessive 'dieseling'.
    I’m surprised that throwing snake oil in the crankcase didn’t cure an unrelated issue. Maybe sea foam in the rear tires would do it.
  • GeoHorn
    GeoHorn replied to the thread ROPS Tool Box.
    I used an ATV front-mount rack (and square U-bolts from TSC):
    • IMG_1649.jpeg
    • IMG_1648.jpeg
    • IMG_1647.jpeg
    • IMG_1646.jpeg
  • GeoHorn
    Now that's funny!! I think it's cute to see Neil so proud of his son. I spoke to Neil on the phone a few years ago and I was impressed...
  • GeoHorn
    If you are near an airport that has a maintenance shop, see if you can get a product called ' PRC', its a 2 part mix, goop like that...
  • GeoHorn
    GeoHorn replied to the thread Canopy fan question.
    Most of these tractor alternators are only 40A…but there are a few optional at 70/90A. The problem will not be your alternator (if you...
  • GeoHorn
    GeoHorn replied to the thread blade bolts for GR2020.
    NAaaawwww….. Buy the WHOLE SET of Sockets! That way you’ll have a nice, organized “rack” to keep them in. You’ll never be satisfied...
  • GeoHorn
    GeoHorn replied to the thread blade bolts for GR2020.
    Uhhh… the sets of impact Metric sockets are typically: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 21 mm, 22...
  • GeoHorn
    GeoHorn replied to the thread blade bolts for GR2020.
    Put calipers on it.
  • GeoHorn
    GeoHorn replied to the thread European Hornets.
    BEST WASP BEE HORNET KILLER is a garden-sprayer with a cup or two of liquid detergent….either laundry or dish detergent. A cup per...