Flintknapper's latest activity
-
Flintknapper replied to the thread CORN!.Yeah they love to stash things in the blower motor fan. -
Flintknapper replied to the thread L2600DT engine swap options.I have a '97 model 80 series and a '99 model 100 series Land Cruiser, so you are a man after my own heart. Hope you get the tractor...
-
Flintknapper replied to the thread What is the proper loading sequence for the “Parts Cannon” ?.You get a A+ for perseverance! (y) I'd argue a parts 'cannon' was used though. Maybe something 'belt fed'. Good job.
-
Flintknapper reacted to Runs With Scissors's post in the thread You can’t "drink all day” unless you start early! with
Like.
Careful there Amigo; Even “suggesting" that I start another hobby could get you "hunted down” by my wife ;) -
Flintknapper replied to the thread Oil pan question.As 'NIW' suggests above, go with a block heater. They are not difficult to install in most cases and will do a MUCH better job.
-
-
It's a worthless endeavor to heat the motor oil. Get a block heater and heat the whole engine Besides A lot of Kubota's have aluminum...
-
Flintknapper replied to the thread You can’t "drink all day” unless you start early!.
-
-
There is a filter (screen) that can be cleaned. This illustration is from this site: https://apps.kubotausa.com/illustrated-parts/...
-
Flintknapper replied to the thread Is there anything that your wife or partner did or said many years ago that still makes you laugh decades later?.Two things actually, both on the same trip. While still engaged, we were living in Austin, Texas and going to visit her folks in Deep...
-
Flintknapper reacted to GreensvilleJay's post in the thread How do I get this plug out of the motor it doesn't have any kind of a head on it and I don't want to tear anything up with Like.
First thing to do. BUY one of those plugs ! 2nd, find the proper , new METRIC Allen key that fits it. JAP engine 'has' to be Metric...
-
Flintknapper replied to the thread Best gravel rake.Plain Old 'Countyline' rake from Tractor Supply has worked fine for me. If you need to actually 'move' gravel some distance it will...
-
-
Flintknapper replied to the thread What to do with ‘yard’ waste?.I regularly burn brush piles. No burn permits required where I live but I do consult a burn ban map first. Just be certain you have a...
-
Get a burn permit, a gallon of diesel fuel, not gasoline, propane torch, wait for waste to be dry dead, wait for moist weather and have...
-
Another indication of my American machinist reluctance to embrace the metric system. I have been able to adjust to calling the wrench...
-
Flintknapper reacted to North Idaho Wolfman's post in the thread Tools you want to brag about? with Like.
Wouldn't that be 10mm is 257mm 19mm is 397mm :LOL::ROFLMAO::LOL: A tool is never too pricey when it does the job you need it to do. ;)
