Downeaster's latest activity
-
Downeaster replied to the thread MMM front pin..That is where I bought it about 2 weeks ago. I receive a pin and spring from them, but later decided to call, and see if someone would... -
I know my uncle who's 90 yrs old has a BX. He bought from Wallingford in Auburn. He has them come in the fall to remove the mower deck...
-
Downeaster replied to the thread MMM front pin..I have no family near by, but called the dealership, and they will stop by and install it. Thanks guys.
-
Downeaster replied to the thread MMM front pin..Not actually the same pin. It would be one of the two rear pins that you pull out and release to hook up the MMM. It's name according...
-
Sending a pin would likely be reasonable for many customers, but it isn’t reasonable for an 82 year old with balance issues. Absolute...
-
I recently purchase a new BX2380 tractor. The dealership dropped it off at my home. Later I realized that one of the MMM pins was...
-
A frequent question that comes up here revolves around "I have xxxxx. What should I use to remove the snow around here". Usually this...
-
Downeaster replied to the thread Best position for bucket hooks.I put two hooks on my bucket, directly in line with the loader arms.
-
Typically, weld-on or bolt-on, each hook directly in line with each loader arm. Sometimes a third hook in the center, but that causes...
-
Downeaster replied to the thread Bucket cutting edge.I have both a Piranha cutting edge and a smooth one. I like them both.
-
Piranha also has a smooth edge bar that attaches the same way. 2 bolts, off or on.
-
My B2601 has wiring under the right taillight marked with blue tape. It is powered by a 10A fuse in the fuse block. I used it to power...
