Caden's latest activity
-
Caden replied to the thread Exhaust Mod?.Not sure if this is what you are thinking of... But there are some pics of some setups in the beginning. It got derailed by SidecarFlip... -
Caden replied to the thread How long do the MMM belts last?.Yes, with the belt off you need to try to spin all your idlers and spindles by hand. If you have a failing bearing in one of these...
-
Caden replied to the thread New member from Martinsburg, WV.Welcome! Lots of good people and good information here.
-
Caden replied to the thread Pulled the trigger on my first tractor!.Congrats on your tractor! Couple things to be mindful of when it comes to dragging driveways. Before getting any new stone as you say...
-
Caden replied to the thread Hydrolic only works @ nr 7/8.Also kinda depends on how your mower is configured. The John Deere/Woods mower combo I use to brush hog only picks up about 10-12...
-
Caden replied to the thread need to dig shallow trenches - no backhoe.Not having a fel, I've done a mild ditch with my rear angle blade. Used all the level adjustment in the blade its self plus the level...
-
He is not trolling. He is a retired soldier that knows his business. I assume by his handle that he is a retired Master Sergeant. That...
-
Caden replied to the thread Help please! My L47 ran out of fuel (I think) and now it’s acting like the battery is dead!.I kinda doubt the battery died if you only left the key in the on position for a few minutes while off the tractor like you say. I'd...
-
Caden reacted to #40Fan's post in the thread Help please! My L47 ran out of fuel (I think) and now it’s acting like the battery is dead! with
Like.
What kind of jumper pack are you using? I've seen some of the fancy new ones default off when they don't see any voltage. Get a set of... -
I will not stoop to that low of level. It is against company policy. It is a violation of federal law and carries a huge personal fine.
-
YEP! Kubota dealers can not legally work on deleted equipment.
-
According to Kubota's site, the kits are not the same; but they're ~$200 each :eek:. You could buy new third party cylinders for that...
-
The only way you're probably gonna get that out is to weld a nut to it.