armylifer's latest activity

  • armylifer
    11 Years ago I put in some green colored 10 year coolant in mine. I guess it is time to change it this year.
  • armylifer
    armylifer reacted to Runs With Scissors's post in the thread Alternative to Carbon Tax? with Like Like.
    The biggest problem with a "carbon tax" is the fact that people actually believe there is a "carbon problem" in the first place. Just...
  • armylifer
    armylifer reacted to North Idaho Wolfman's post in the thread Engine compatibility with Like Like.
    The base motor will be the same, you may need to change out bolt on parts.
  • armylifer
    armylifer reacted to Kubota Newbie's post in the thread Air pressure with Like Like.
    AG tire manufacturers all publish load inflation tables for their tires. For the best combination of ride, load capacity, traction, and...
  • armylifer
    armylifer reacted to GeoHorn's post in the thread Air pressure with Like Like.
    Yes …BUT….the Max pressure.. AS SHOWN IN THE OPERTORS MANUAL….is 29 psi….. NOT the Max Pressure as shown on the SideWall.
  • armylifer
    armylifer reacted to 85Hokie's post in the thread Air pressure with Like Like.
    As others have said - the tire manu is telling HOW much max - Kubota is telling what should be with a little sag and better grip. The...
  • armylifer
    armylifer reacted to JimDeL's post in the thread Air pressure with Like Like.
    Go with Kubota's spec. Just because the tire manufacturer lists the MAX inflation on the sidewall, it doesn't mean you should inflate...
  • armylifer
    armylifer reacted to DustyRusty's post in the thread BX1880 Wheel Spacers with Like Like.
    All BX tractors have the same rear stud mounting pattern going back as far as 2004. I also know that some of the BX series used a...
  • armylifer
    armylifer reacted to DustyRusty's post in the thread BX1880 Wheel Spacers with Like Like.
    Better take out a damage insurance policy if you add spacers to the front wheels. It will get very expensive very quickly and you are...
  • armylifer
    armylifer reacted to Henro's post in the thread BX1880 Wheel Spacers with Like Like.
    Don’t do it! Almost no benefit as far as stability goes and great risk to overstress the front axle components due to the geometry of...
  • armylifer
    armylifer reacted to 85Hokie's post in the thread BX1880 Wheel Spacers with Like Like.
    Those 1" spacers for the front will not be as helpful as the back - the problem is that the front pivots on a center pin - while making...
  • armylifer
    armylifer reacted to GeoHorn's post in the thread Puncture proof tires? with Like Like.
    I have used… correction… I have ATTEMPTED to use the “benefits” claimed by “SLIME”…. SLIME…is the WORST STUFF made for this problem...
  • armylifer
    armylifer replied to the thread Engine compatibility.
    Don't go solely by my opinion. You may want to wait and see if others reply with more sure knowledge than I have.
  • armylifer
    armylifer replied to the thread Chainsaw safety.
    Until reading this thread I never thought about PPE for using a chain saw. I actually did not know that they made chaps or Kevlar pants...
  • armylifer
    armylifer replied to the thread Engine compatibility.
    I am by no means an expert but it seems to me that since the engine code is the same for both engines that they should be compatible.