I told the seller that it was more like $3500, not $8500. What are your thoughts? Only 1 Picture!
Saw this on Marketplace
- Thread starter DustyRusty
- Start date
Even if you replace the bolt on or readily/easily replaced pieces there will probably be pieces that will remain out of square so to speak. Like the frame ,maybe loader arms. I don't know how important that might be on a tractor. Probably not very. I think $5,000 for the tractor and upwards of $5,000 for parts with you supplying the labor would be a good deal if you enjoy fixing things and have the time. Go for it.
Looks like a lot of work and also a lot of unknowns. The bonnet looks pretty beat in to think it only got the rad. I don’t own a b2650 so I’m not really sure what’s going on directly under the damaged areas. Loader is definitely f ed up. Looks like more than 5 grand in parts to me.
What did the seller respond with to your 3500? It would have to be something super low or cheap. And even then who knows.
Looks like the right side loader arm is bent.
Does it come with the trailer it's on?
Does it come with the trailer it's on?
in the add it says........... "Only reason I’m selling is because I bought a new one".
Me thinks maybe there might be another reason or two its up for sale.
Me thinks maybe there might be another reason or two its up for sale.
That tractor is tweaked so bad it only good for some mechanical parts. Seller thinks after purchasing two parts you'll have a working machine... not hardly. He's as full of it as a Thanksgiving turkey!
I wouldn't buy it.
But, as an optimist, I'll say that photo doesn't tell you everything you need to know. The trailer isn't level, the hood is bashed in, it's hard to tell if the loader is bent or not. If it's genuinely the hood, the ROPS, the radiator and you can establish nothing under the hood is busted.....it could be fixable and be a great machine. You'd want to know what you were looking at and look very closely before you took it on as a project though.
But, as an optimist, I'll say that photo doesn't tell you everything you need to know. The trailer isn't level, the hood is bashed in, it's hard to tell if the loader is bent or not. If it's genuinely the hood, the ROPS, the radiator and you can establish nothing under the hood is busted.....it could be fixable and be a great machine. You'd want to know what you were looking at and look very closely before you took it on as a project though.
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
so... instead of spending $1800 for some parts, the guy forks out $30K for a new one ???
only posts ONE picture....HUGE red flag !
curious, can you even BUY the ROPS, in the USA ? AT KUB CDA parts, no prices are shown.
hmm, anyone else think the seat is a little 'wonky' ? Bet there's a LOT of damaged 'bits and pieces' under the hood. Hopefully engine wasn't running at the time the tree came to 'visit'.
To me $3500 is generous
only posts ONE picture....HUGE red flag !
curious, can you even BUY the ROPS, in the USA ? AT KUB CDA parts, no prices are shown.
hmm, anyone else think the seat is a little 'wonky' ? Bet there's a LOT of damaged 'bits and pieces' under the hood. Hopefully engine wasn't running at the time the tree came to 'visit'.
To me $3500 is generous
BAP
Well-known member
Lifetime Member
Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Looks like left rear tire is either low or flat, but could be the trailer. Obviously, it was sitting right where it is now when the tree fell, seeing how the box trailer behind is crushed and there is pine limbs on the bucket area. I think it is impossible to determine how much actual damage there is and value without looking at it in person. Very likely there is rear end housing damage on the tractor.
If the tree that fell was heavy enouhg to crush the ROPS, all that energy went in to the rest of the machine.
Run fast, run far from it.
My best offer would be $500 if they include delivery.
Run fast, run far from it.
My best offer would be $500 if they include delivery.
I'm thinking the pine tree fell on the tractor and trailer where it's sitting. The landscape rake is in at least 2 parts... Not sure about the snowmobile trailer behind but pine branches are on top of it, too...
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
ken erickson
Well-known member
Equipment
B7100 hst, 2650 front mount snowblower, L2501 hst qa loader
If only he had not drilled the two 1/8 inch holes in the ROPS to mount the light bar, It would not have failed and would have protected the rest of the tractor! 
fried1765
Well-known member
Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
I am certain that Kubota corporate would agree!If only he had not drilled the two 1/8 inch holes in the ROPS to mount the light bar, It would not have failed and would have protected the rest of the tractor!
There must be a lot of folks selling things that have a good sense of humor, if that is what it is. They say things like it's an easy fix. I always think if it was so easy why didn't you fix it? Or, it won't last long. Or, my loss your gain.