I have a 2011 M7040 4wd, my problem is that the 4wd stays engaged, I got under the tractor and physically took it out of 4wd, the light went off and all worked fine in 2wd. I was able to put it in and out of 4wd, but now it's back to staying in 4wd, I can pull up and down on the lever, but stays in 4wd, but I can go under the tractor and take it out, and it stays in 2wd until I use the lever to place it back in 4wd, then it stuck again! I think it may be something to do with the linkage, but this is in a very tight spot and I possible would have to remove the fuel tank to access it unless someone has a better idea.
Any and all suggestions are greatly appreciated.
Any and all suggestions are greatly appreciated.