Hey there, We are having our Z1300 motor rebuilt and are having difficulty locating ring sets for it... Does anyone know where I can get even oversize ring set for this motor? My mechanic said he can cut down oversized rings to make them fit but I am having trouble finding any!! Please help
Looking for piston rings for myL260 Z1300 kubota tractor
- Thread starter rwyatt
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
I'm confused you don't use over sized rings?
You use over sized pistons.
But better yet replace the sleeves to get it back into spec.
www.yearnparts.com
You use over sized pistons.
But better yet replace the sleeves to get it back into spec.
Z1300 Overhaul Rebuild Kit for Kubota Engine Z1300
Z1300 Overhaul Rebuild Kit for Kubota Engine Z1300 Type:Overhaul Rebuilding Kit,Engine PartsApplication:Kubota Engine Z1300 Products Include:Engine Over Haul Kit(1.Four Macthing Set)2 pcs piston.(Standard,)2 pair piston ring,2 pcs piston pin,4 pcs Snap
www.yearnparts.com
Sorry, I am new to all of this but thanks for the info and we will get on buying one of these!!!! Thanks so muchI'm confused you don't use over sized rings?
You use over sized pistons.
But better yet replace the sleeves to get it back into spec.
Z1300 Overhaul Rebuild Kit for Kubota Engine Z1300
Z1300 Overhaul Rebuild Kit for Kubota Engine Z1300 Type:Overhaul Rebuilding Kit,Engine PartsApplication:Kubota Engine Z1300 Products Include:Engine Over Haul Kit(1.Four Macthing Set)2 pcs piston.(Standard,)2 pair piston ring,2 pcs piston pin,4 pcs Snap
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
You will need to have a machine shop, remove the original sleeves and install the new ones and then bore the cylinder sleeves to size.
We already had the machine shop reaching the head cuz it had 4 cracks in it. It was bad.