L3130 front axel

Proot

New member

Equipment
L3130
Dec 18, 2020
2
0
1
Va
Seal leaked. I drove tractor and it ground the axel and the wheel fell off. Now I have to replace the flange,axel and bearings
Did a bad seal and oil drained out cause the bearing and axel to fail or do i have another problem. I didn’t drive more then 1/2 mile with low gear oil
 

66vette

New member
Mar 14, 2014
20
0
1
Greenville, Ohio
I had the same thing happen to my L3130, bought a used L3130 forgot to check front axle fluid, drove about 1/2 mile and the wheel fell off same as yours. Replaced everything by Kubota service center and everything fine now.
 

Proot

New member

Equipment
L3130
Dec 18, 2020
2
0
1
Va
I had the same thing happen to my L3130, bought a used L3130 forgot to check front axle fluid, drove about 1/2 mile and the wheel fell off same as yours. Replaced everything by Kubota service center and everything fine now.
Do you know what they replaced?
 

200mph

Well-known member

Equipment
L4740-3 Cab, FEL, Fnt Snow Blower L2185, LP Finish Mower, LP Rotary Mower
Mar 3, 2017
1,228
61
48
PA
Seal might have leaked because the bearing was going bad, causing the axle and seal to no longer be coaxially aligned.

Curious how much ballast you use with the loader. It's very easy to overload the front axles without a significant amount of weight hanging off the back. This can be exaggerated if your machine has the 700 series FEL vs the smaller 500 series.
 

66vette

New member
Mar 14, 2014
20
0
1
Greenville, Ohio
I tried to attach the file also copy the file and list it below but the site would not let me do that. There are 25 items they replaced.
 
Last edited:

old and tired

Well-known member

Equipment
L2800 HST; 2005; R4
Is one of these files the correct one?