Kubota L185

[vitormotor]

Hello
Can't the engine work
In out Kubota: CAP, VALVE, Part # 15221-13280

 

[North Idaho Wolfman]

Yes that is the same part # for your L185 / Z751

Sim, é o mesmo número de peça do seu L185 / Z751

 

[vitormotor]

Comprei um cabeça para o kubota L185
Já tinha as válvulas instaladas
Tem uma diferença
A parte que leva a capa valve
É mais alta

 

[vitormotor]

bought a head for the kubota L185 I already had the valves installed. there is a difference The part that takes the valve cap is higher

 

[North Idaho Wolfman]

Picture of it please.
It may be remade where it doesn't take the cap?

 

[vitormotor]

Picture of it please.
It may be remade where it doesn't take the cap?

Já está resolvido
Agradeço ajuda de todos

 

[North Idaho Wolfman]

Já está resolvido
Agradeço ajuda de todos

EXCELENTE

 

[Russell King]

Please explain how you repaired the problem.

Por favor, explique cómo reparó el problema.

 

[North Idaho Wolfman]

Please explain how you repaired the problem.

Por favor, explique cómo reparó el problema.

Russell, you're close, he speaks Portuguese not Spanish.

Please explain how you repaired the problem.

Por favor, explique como você corrigiu o problema.

 

[Russell King]

Russell, you're close, he speaks Portuguese not Spanish.

Please explain how you repaired the problem.

Por favor, explique como você corrigiu o problema.

Sorry I guess I copied the wrong translation since my Spanish is weak and Portuguese is non existent (other than I can tell it is not Spanish)

 

[North Idaho Wolfman]

Sorry I guess I copied the wrong translation since my Spanish is weak and Portuguese is non existent (other than I can tell it is not Spanish)

No sorry needed, It was just slightly off.
It's cool that we all can help others from all over the world!

 

[vitormotor]

No sorry needed, It was just slightly off.
It's cool that we all can help others from all over the world!

Tinha uma batida nas válvulas
Depois de análisar foi visto que o problema era afino de válvulas

0.18mm admissão 0.22mm escape
Agradeço ajuda

MOD Translation:
Had a knock on the valves
After analyzing it, it was seen that the problem was valve tuning

0.18mm intake 0.22mm exhaust
thank you for help