Good morning. I don't have a part number but looking for the adapter to bolt onto the crankshaft pulley of a d850/d950 to give it a splined shaft to use a hydraulic pump. By chance anyone out there have one laying around?
Kubota d950 splined crankshaft adapter
- Thread starter Mountainman
- Start date
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Pretty easy to make your own takeoff and it gives you much more flexibility in the size and type of coupler needed.
Dan
Yes sir. This one is for a customer that put a d950 in a b7100 and still wants to use the front pump on his b219 loader. I was just trying to help him find one. But its probably gonna be easier to make one
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Here is a thread that has some ideas on a replacement shaft
www.orangetractortalks.com
B7100D hydraulics and adding a FEL
Hey guys, just wanted to give an update. I've had the Westendorf TA55 frontloader on there for a while now with no problems! I've got ~25 hrs of heavy front loader work with no issues. I ended up fabricating a pump shaft using the female spline of flange 66704-88530 to 3/4" keyway stock and a...
www.orangetractortalks.com
Thank you sirHere is a thread that has some ideas on a replacement shaft
B7100D hydraulics and adding a FEL
Hey guys, just wanted to give an update. I've had the Westendorf TA55 frontloader on there for a while now with no problems! I've got ~25 hrs of heavy front loader work with no issues. I ended up fabricating a pump shaft using the female spline of flange 66704-88530 to 3/4" keyway stock and a...