The I&T service manual is a very good buy. A good price for the information contained within. Like most Chilton's manuals it can be a little sparse but it's still quite good.
The spec for your machine is 0.006-0.008 inchs. I hadn't noticed before but the spec for the exhaust and intake valves are the same for my engine and yours. Not sure what's up with that, usually the exhaust is set looser than the intake due to thermal expansion. Regardless get a set of feeler gauges and set them at that spec and you should be fine.
The spec for your machine is 0.006-0.008 inchs. I hadn't noticed before but the spec for the exhaust and intake valves are the same for my engine and yours. Not sure what's up with that, usually the exhaust is set looser than the intake due to thermal expansion. Regardless get a set of feeler gauges and set them at that spec and you should be fine.