Front rim for mx5800
- Thread starter HilltopAcres
- Start date
fried1765
Well-known member
Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Make sure about the size the online parts show a different size
Some sites show availability around the $200 level
Some sites show availability around the $200 level
Attachments
thanks Gents
unfortunately kubota disco'ed this particular rim design so my only option is to find a used one or a dealer with old stock kicking around.
My local dealer brought in what he was told was a direct replacement, but it's not the same offset and now the tire bottoms out at full lock against the loader mounting arm.
The 16x9.75 dimension is stamped right on the rim. I tried the Carlisle site, but since these rims were made under a contract for kubota, they dont list them so I'm SOL
unfortunately kubota disco'ed this particular rim design so my only option is to find a used one or a dealer with old stock kicking around.
My local dealer brought in what he was told was a direct replacement, but it's not the same offset and now the tire bottoms out at full lock against the loader mounting arm.
The 16x9.75 dimension is stamped right on the rim. I tried the Carlisle site, but since these rims were made under a contract for kubota, they dont list them so I'm SOL
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Contact HEY WHEEL and they may fix what you have or build you a new one
HEY WHEEL HOME-WHEELS, RIMS, AIRCRAFT TIRES FOR AG USE
"Hey Machinery Company Inc. wheels, rims, aircraft tires and more for agricultural and non-highway use."
www.heywheel.com
at this point he's out of options, he searched the dealer parts network throughout Canada with no luck and kubota insists the rim he got me is the only one available...
Worst case scenario, I will have to cut the center plate out and re-weld it with the correct offset
What is the part number your dealer ordered in? Kubota site list this;
WHEEL(16.5X9.75)
TC050-00790
for the R4 tire. Russell posted the AG tire version.
Looking again, this wheel shows holes for weights I'd guess. Not a solid face like your picture.
WHEEL(16.5X9.75)
TC050-00790
for the R4 tire. Russell posted the AG tire version.
Looking again, this wheel shows holes for weights I'd guess. Not a solid face like your picture.
Last edited:
yes, that's the one
we also tried a rim/tire combo as it showed a solid center design on the diagram, pn L57DTFRTF, but when it showed up, it was the same "four spoke" design with a different offset.
we also tried a rim/tire combo as it showed a solid center design on the diagram, pn L57DTFRTF, but when it showed up, it was the same "four spoke" design with a different offset.