BX2670 front end loader max load

jmf78

Member

Equipment
BX23S W/ Factory Deluxe Cab, 60" MMM, 60" BX-2612 Snow Blade & BX-2816 Blower
Nov 5, 2015
437
4
18
Edinboro, PA, USA
I will be receiving a delivery that will weigh approximately 875 lbs. The only means I have for taking it off of the truck (pick up) will be my BX2670 front end loader. I have a grader blade on the back that weighs about 200 lbs. I won't have to move the tractor at all with this load. Will I do any damage to the loader or the tractor with this much weight?

Thank you

Sent from my SM-N920V using Tapatalk
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,471
2,244
113
Bedford - VA
I will be receiving a delivery that will weigh approximately 875 lbs. The only means I have for taking it off of the truck (pick up) will be my BX2670 front end loader. I have a grader blade on the back that weighs about 200 lbs. I won't have to move the tractor at all with this load. Will I do any damage to the loader or the tractor with this much weight?

Thank you

Sent from my SM-N920V using Tapatalk
Not sure she will do it ....

Lift to full height (at pin): 745 lbs [337 kg]
Lift to full height (at 500mm): 518 lbs [234 kg]

what cha trying to pick up? Any way to lighten that load?
 

Bulldog

Well-known member

Equipment
M 9000 DTC, L 3000 DT
Mar 30, 2010
5,440
73
48
Rocky Face, Georgia
To be honest, it will surprise me if your loader will pick up that much weight. That will be a huge load for that size tractor.
 

jmf78

Member

Equipment
BX23S W/ Factory Deluxe Cab, 60" MMM, 60" BX-2612 Snow Blade & BX-2816 Blower
Nov 5, 2015
437
4
18
Edinboro, PA, USA
I was afraid of that. I have no idea of what it is. It's a Christmas gift from my girlfriend. We'll have to figure something else out. Thanks all for the replies and help.

Sent from my SM-N920V using Tapatalk
 

CountryBumkin

New member
Lifetime Member

Equipment
BX2370 w/LA243, Bucket, Grapple, QA Pallet Forks, 60" MMM, rear blade & rake
Sep 27, 2015
568
3
0
Central FL
It would be difficult - but your close.

My BX "70 series" manual says the LA243 will lift 374kg (827lbs), a little more than Hokie said, at the Bucket pivot pin (point W in the manual). So, if you could remove the bucket, to drop 100lbs of bucket weight (if you have the Quick Hitch), you could get the job done (assuming you have enough weight on the rear end).
 
Last edited:

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,471
2,244
113
Bedford - VA
I was afraid of that. I have no idea of what it is. It's a Christmas gift from my girlfriend. We'll have to figure something else out. Thanks all for the replies and help.

Sent from my SM-N920V using Tapatalk
Must be a hellva gift!:)
chipper?
Tiller?
Pool table?

niiiiiice gf to say the least!:);)
 

jmf78

Member

Equipment
BX23S W/ Factory Deluxe Cab, 60" MMM, 60" BX-2612 Snow Blade & BX-2816 Blower
Nov 5, 2015
437
4
18
Edinboro, PA, USA
Must be a hellva gift!:)
chipper?
Tiller?
Pool table?

niiiiiice gf to say the least!:);)
Well.....she managed to realize this morning that it's only 200 lbs. Not 875 lbs. A little bit of difference....I think we can manage that.[emoji16] [emoji15]
But..just the same...she definitely is a helluva gf. [emoji5]

Sent from my SM-N920V using Tapatalk
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,471
2,244
113
Bedford - VA
Well.....she managed to realize this morning that it's only 200 lbs. Not 875 lbs. A little bit of difference....I think we can manage that.[emoji16] [emoji15]
But..just the same...she definitely is a helluva gf. [emoji5]

Sent from my SM-N920V using Tapatalk

well now - that IS good news!!!

YOU can use your bucket after all! beats the hell out of the snatch lift and lower!:D
 

jmf78

Member

Equipment
BX23S W/ Factory Deluxe Cab, 60" MMM, 60" BX-2612 Snow Blade & BX-2816 Blower
Nov 5, 2015
437
4
18
Edinboro, PA, USA
well now - that IS good news!!!

YOU can use your bucket after all! beats the hell out of the snatch lift and lower!:D
Ha! Yes....good news indeed![emoji4]
So I suppose it's not a pool table.
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,471
2,244
113
Bedford - VA
Ha! Yes....good news indeed![emoji4]
So I suppose it's not a pool table.
It is one of those 72" SuperHD tv's .......she spent a fortune on you! :D:) Just in time for the super bowl!:) What a gal!:) Now you will have to spend that $$$ on the little gold/diamond thingy!:):):)
 

jmf78

Member

Equipment
BX23S W/ Factory Deluxe Cab, 60" MMM, 60" BX-2612 Snow Blade & BX-2816 Blower
Nov 5, 2015
437
4
18
Edinboro, PA, USA
It is one of those 72" SuperHD tv's .......she spent a fortune on you! :D:) Just in time for the super bowl!:) What a gal!:) Now you will have to spend that $$$ on the little gold/diamond thingy!:):):)
Wow!!! She is the best!! Can't wait!
Unfortunately for her she's getting a shotgun for Christmas. ...no little gold/diamond thingy. Lol. Not this year anyway. [emoji16]
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
29,093
5,391
113
Sandpoint, ID
At the 875 LBS I was thinking good size gun safe! ;)
At 200lbs I would say very small gun safe, better called a gun cabinet! :D
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
13,140
4,515
113
40 miles south of Kansas City
Maybe she's got it set up to surprise you, but make sure you are there upon delivery. Maybe she's in the box!!;)
 

TheSpoon

New member
Dec 2, 2015
24
0
0
MEEEEchigan
Now wait a minute. Is the 200# number accurate? The 875# wasn't. And....she's in the box. How much does the box weigh?

Quit trying to start a fight.:p
If she's Schrodinger's GF, until you open the box she weighs both nothing and 200#. Don't open the box and just say all the weight is the box.