Bulltra B1-15 Temp gauge problem

[DiegoInTheAir]

Hi everyone ! 1 year ago my dad ans i purchased a B1-15 and temp gauge never worked. So I removed the temperature sensor, tested it and it works normally. I then tested the continuity of the wire and everything is fine. I took the dashboard apart to look at the connection but everything seems ok there too. If you have any ideas, don't hesitate!
Sorry in advance if my English is not great

Diego and Jerome

 

[85Hokie]

Gents,

Your English is better than most here

Have you place a hot wire to the gauge and then grounding the gauge? If so - it should go to HOT on the gauge.

 

[DiegoInTheAir]

Gents,

Your English is better than most here

Have you place a hot wire to the gauge and then grounding the gauge? If so - it should go to HOT on the gauge.

I'll try that tomorow, thanks !!

 

[Xpecimen]

H

I'll try that tomorow, thanks !!

Hello Diego,
I have the same problem on my B1-17, were you able to solve the problem?
If you did, what was the solution?
Compliments