B7200 Hydraulic Loader Cylinder repair

[avpowerstn]

Ok I have a seal kit for a B7200 HST-D loader (B1630),I have torn down the Lift Cylinder, but I am not sure , what goes where. any help would be appreciated. Thanks

 

[Eric McCarthy]

Might want to repost that in the service and repair section and not in the classifieds. Someone is more likely to see in in the service and repair threads and help you out there.

 

[300zx]

avpowerstn, it is hard to tell from just the picture of the parts. Here is the parts break down for your FEL in Kubota Books and it shows the parts in the cylinders. That might be a good place to start:

http://kubotabooks.com/AutoIndex/index.php?dir=Loaders and buckets/

Just download and open the pdf for the B1630.

I usually match parts up as I take them off and lay them in order on a piece of cardboard so I can write down any orientation notes for reassembly.

Good luck,
John

 

[avpowerstn]

Might want to repost that in the service and repair section and not in the classifieds. Someone is more likely to see in in the service and repair threads and help you out there.

OK, I reposted it in the Repair section and added a little more info. I am new to these forums. Thank you for the advice. Jim