Search results

Why mickey mouse around with stuff not designed to be mixed with water as tire ballast. Use Rimguard. If you spill it, no big deal. I could definately see a shop not wanting to touch a tire/rim filled with water/anti-freeze.

Hey Marine, I reread your original post...have you actually hooked everything up and verified the fan is running backward on your blower under power? Don't mean to insult, your original post seems to indicate you didn't get that far.

Eric...I believe that saying all Japanese Kubota's turn CCW is incorrect. In the myth section on this site they post the following: Myth #7: The PTO Turns the Wrong Way PTOs typically rotate clockwise. Both the PTO and the implement being driven must turn the same direction. There are only two...

Hi Still working this problem over...found this company on the web (of course). They make a variety of equipment. The main thing is they stock parts for what they make. The picture looks like it has the reverser you need. Now it depends on how small of a subassembly they will let you buy. Kind...

Hi Noticed on this link they list reverser on left side column. Good Luck! http://sheaftractor.net/index.html

Hi This setup is made by OMNI Manufacturing in MN. Good Luck!

Hi Dug this up on the web. It looks like what you are looking for. The link will take you to the page I was looking at. Included a couple of their pic's. If I didn't have a blower on mine, this looks pretty neat. I think it would do better job than an ATV, especially if you have weights. I...

This is from OMNI MFG http://omni-mfg.com/OMNI-BX-Special-3-Point-Trailer-Hitch-for-Kubota-P320193.aspx I use his combo hitch, picture attached, and it is well made. Just use 2" male receiver of your choice. If you have...

I purchased this from OMNI Mfg. also. I had a plate added that holds 40 pound weights also. although you can get without. Robustly built and I like that it extends away from the tractor a bit. It lets me work trailers into tighter spots.

You definately want to use the skid shoes. I had a recycled concrete driveway (basically white gravel). When I plowed with a blade I set the shoes as high as they would go. You will still take a lot of rock off of the driveway. I had no choice when I plowed but to push it into my yard...picking...

Hi I have a B2630 with front mount blower. You do not have to remove the subframe to change between the FEL and Blower. The blower head lifting frame goes on easy...one guy can do it no problem. 15 to 20 minutes to swap between them and I would bet faster if a guy does it all of the time.

Hi! Plowing vs blowing snow is a whole nother animal. I plowed a 80 yard driveway with a Polaris ATV that had a 60" blade for 7 long years. Lessons learned: plow the snow as far away from your driveway as you can stand...when it snows and snows you need room to pile it. If it looks like a big...

This is what I came up with for my B2630. I believe a lighter compact tractor than yours. It works great and the 40 pound weights are easy to handle. It is amazing how much you can push with a little rear weight!

Check out my post 5 or 6 pages back. It works great. Scrounging the weights will keep the cost down. The individual 40 pound weights are easier to handle than a 50 gallon drum filled with concrete. http://omni-mfg.com/Default.aspx is were you can purchase the combo hitch. Watch the tougue...

The hitch with hook, pins and freight was around $230. 6 40's used for $150 and shelled out $100 for 2 new. 2 cans Kubota orange...Around $500 for everything. Probably should have scrouged harder for 2 more used weights, but wanted it done and finished. Rock picking and yard projects bearing...

I was always looking for a way to easily put weight on the back of my B2630. I use the bucket a lot and move trailers around. I'm sure I couldn't have been the only guy looking. The hitch was made by OMNI Mnfg. in MN. Build quality looks pretty good. I did scrounge to find 40 pound JD...