Search results

UPDATE.... I'm an idiot. I pulled the camshaft, had a repaired plug at the back too. Got the machine back together - full bottom gasket set, new head gasket, lots of swearing to get the front axle back on and the 4wd driveshaft back in place Borrowed an oil pressure gauge and it has constant...

IIRC it has 1600 hours on it, what do we consider high hours ? I have a new gasket set and some heavy duty diesel 15w-40 oil ready to reassemble, is that going to be heavy enough or what's suggested for heavier oil ? I will look into the oil pump and if there's a relief valve, I haven't looked...

I have had the low oil pressure issue many people have had with this late 70's machine, and assumed from seeing other posts it probably needed the cam shaft plug repair. I took the whole front of the tractor off, removed the sump and oil pickup which was clean and clear, removed the timing cover...

For anyone that finds this in the future, the leak was actually a small weep from the front end loader hydraulic ram, it runs down the underside of the ram and drips off the hydraulic connection directly above the wheel. In the end I used a stainless steel strip off the back of an old...

I have an L1801DT and tried to fit a Ryco z9 oil filter but it DOES NOT FIT ! The body of the filter is too wide and even though it seems close there's no way you'd be able to force it onto the threads. Things might be different for the L1802 but I think it's worth mentioning for the people...

Hi all, I'm having a bit of trouble finding specifics for my machine, I think I have a leak (Oil all over the outside / inside of the front left wheel) either from the axle oil or maybe from the front end loader hydraulic oil dripping from a fitting above. I believe this is a Japanese domestic...