Search results

  1. A

    Part help

    Thank you so much!
  2. A

    Part help

    Than you so much!
  3. A

    Part help

    I need a new mounting nut for the ignition switch on my L4610. The old one apparently vibrated off. Any help finding one is much appreciated.
  4. A

    L4610 reverse only

    The linkage.
  5. A

    L4610 reverse only

    This is the pipe that was bent and rubbing up against the linkage.
  6. A

    L4610 reverse only

    I took the damper off and it is still real hard to push the pedal down. There doesn't seem to be anything else hitting against the linkage. The spring and tensioner did look bent to me so I bent it back to where it looks correct. The pedal seems a little looser now but still not right. I might...
  7. A

    L4610 reverse only

    Ok. I'll look at that tomorrow. Probably going to have to send you a pic. I'll let you know. Thanks for the help.
  8. A

    L4610 reverse only

    Ok. I got the nut off and out a new one on. Not as tight this time and it is still hard to push all the way down to go forward. Reverse is fine.
  9. A

    L4610 reverse only

    Alright. I finally got a chance to get under it. I found where a hard hydraulic tube got bent and was preventing the pedal from going all the way down. It is better but still not like it was. I had noticed that the nut holding the pedal in its bracket had come completely loose so I tightened it...
  10. A

    L4610 reverse only

    I will check it this evening when I get home. I hope that is all it is.
  11. A

    L4610 reverse only

    My L4610 goes real slow in forward. It seems normal in reverse. Hydralic oil was low. Filled but same problem. Was Bush hogging pasture with some small trees when it stopped going forward. Any suggestions?
Top Bottom