Search results

I installed a RhinoHide canopy on my B2650 a couple weeks ago........I would buy again. Very well built canopy.

I have purchased a couple pieces of equipment with no issues.

Most dealers don’t set these mowers up for use with a quick hitch. I had to adjust mine after I got it home per the instructions in the owners manual. One other note....you should use the float position on your 3 point hitch when using a quick hitch with a floating top link (also per the owners...

You need to purchase a floating top link kit (see figure 1-5 in post above). I am using a QH05 with my FDR1672. I had to purchase the floating top link from my local dealer (about $38) to make it work. The kit attaches to the quick hitch.

I***8217;m mowing about 10 acres weekly of mixed lawn and fescue pasture. The past few years I was mowing it all using a ZTR (diesel powered 61 inch 725D Grasshopper). This year, I began mowing the open pastures using an RFM (Land Pride FDR1672). I now only use the ZTR for mowing around the...

Ditto here. I have a Landpride QH05 quick hitch and my Landpride RFM is quick hitch compatible. Most days I can hook up and remove in less than 3 minutes.

I’m mowing a 7 acre fescue field about every 7 days with a 3 point mounted 72 inch grooming mower (Landpride FDR1672) behind m B2650. Absolutely love the cut and no issues whatsoever with my tractor pulling that mower. I mowed the same field for years with a diesel powered zero turn...

I am maintaining an 8 acre fescue field weekly which is flat with some low rolling hills. I am running unloaded turf tires on my B2650. Id like to get as wide a cut as possible with a rear mower. I watched video of a guy pulling a heavy Landpride 2572 mower up some steep hills with oversized...

Are any of you running a 72 inch finish mower behind your B2650 similar to the Landpride FDR1672 or Woods RD72? Any problems?

Thanks for the feedback.....I will be buying the 60 inch box.

What size box blade are you folks using with your B2650? The manual says a max width of 54 inches and weight of 500 lbs. The rear width of my tractor, with turf tires, is 60 inches (5 ft). I’m leaning toward buying the 5 ft box blade vs. the smaller 4 ft model. My place is mostly dirt with...

I havent measured them but believe the OEM spacers are 1 5/8 inches each

I am running Titan turf tires with factory rear wheel spacers. The overall width on my B2650 is approximately 60 inches.

Another greenhorn here seeking advice. I have a new B2650 with factory spacers and Titan turf tires. The outside spread of my rear tires is 59 to 60 inches. I am looking to buy a rear blade for light snow removal and smoothing dirt in some low spots in my field. The manual states the max...