Search results

I believe this stinger can reach approx. 20', here is a picture how I was able to lift the sheets over a 12' wall. My wife was on top pulling the sheet onto the rafters until I got up there to help set it in place.

Here's another side view of the welded tubing and the stinger in place. I have two hooks located on the top of my bucket that I intend on placing a hook on the stinger to attach a chain for additional support when lifting heavy things. I used this stinger to lay my 14' sheets of metal across and...

I welded a short square tubing onto my bucket for the stinger to slip into. I was able to lift a double stack 2'x 12" beam 40' long into place on a 12' wall as a support beam. I also use the stinger for lift the roofing into place. I plan on making a one man basket to attach to this stinger for...

I presently have a L-4400, and would like to purchase a L-4701 4-wheel drive. The Dealership is telling me that the FEL LA703 will not switch over to the new tractor because of the frame. My question is there some slight modification needed to make LA703 fit where the LA765 goes. I have made...

I welded two hooks and one D-ring to the FEL on my tractor and it has come in handy a many of times.

Did the research for you and went to Tractorbynet.com and found the thread written by " Dex3361" The search is titled Front End Loader Pressure check. Full details on how to increase the Psi, saw a thread that indicated 2347 Psi for the L-3400. Don't take it to the bank,check with the dealer and...

Depending on the size of the cedar and root system, you may be able to pull them up with a chain and hooks welded on you FEL " Front End Loader" , I placed the hooks inline with the Hydraulic on the bucket to make sure when lifting you don't flip the tractor. I also welded an 8" D ring in the...

I have a L-4400 and the FEL lifting capacity seem low when I purchase my tractor used. I'm sure that your L-3400 is setup the same way. A quick coupler and reducer to screw the gauge cost about $ 40-50, I already had the guage, so it was worth every penny for the results. So, I did a little...

I have a L-4400 and the FEL lifting capacity seem low when I purchase my tractor used. So, I did a little research and found on Tractorbynet.com, a forum on how to increase the Hydraulic pressure setting by replacing the manufacture washers with a larger one and checking your pressure increase...