Search results

wondering if the front guard for the 2380's fit width wise etc on the lder bx2360 70's thanks

As part of my job,I get to talk to various engineers. In a recent conversation with a Fuel system engineer. We talked about the cloths that draw oil out of water if you spill a bit of fuel or oil ,and he said you can do the opposite also, by using the absorbent part of a disposable diaper, You...

I'm wondering where I can mount this box, it will hold the joystick to control the chute on my BX rear mount snowblower , thinking an arm off the ROPS or a mount that would catch between the hand bar and the fender, so I can remove it in the spring.thanks for any input...

So glad I chose a BX over the Massey etc,, I looked at Massey yesterday and the frame, the body, the EVERYTHING was not as robust as the Kubota,,and the guy paid the same as me,, Didn't have the heart to ruin his day............

http://innovativetractorattachments.com/?product=kubota-plow-bracket

I have a doz feet of 2" flat bar, and want to build a guard like the one the optional BX for my 2360, so I can add a winch attachment plate to it, so was wondering the dimensions of one if someone would mind measuring one out thanks

Just took the screws out to paint the heads on my low time use BX,, the housings are almost melted through. there might be 10 hrs of use with them on... If yours has warranty,, better have a look at them...

Just doing a servicing on a BX with only a couple hundred hrs, and notice the bushing that goes into the frame on the draft arms, is loose and thought with the loads it sees, it might wear the frame out instead of the bushing, so thought I should make a second plate to clamp the bushing and bolt...

thought I'd post , pic to follow, on something I tried this week,, I took a piece of 1 inch metal EMT conduit. put a 45 degree bend in it. cut it about 1 1/2 inch back and slightly ground the galvanize off to reduce the outside diameter a bit. then took the ridge off the tractor;s outlet and...

Just to ask, if someone had a part number or some dimensions for the boot on the 54 inch deck, I have the fine cut deck, and the grass catcher parts list shows only one boot, but want to be sure the boot fits both regular and fine cut decks, whole goods lists the fine cut deck as BX 3028...

I have a boot for the 60" deck ( 7005004153 ) looking for the boot for the fine cut deck on my BX, RCK54P23bx kit lists as BX3028 not sure if boot is 7005004155 as the parts lists only shows one part number for the 54 decks,although the P is 2 inches deeper I believe.

thought I would ask someone who has a bagger on a BX, what wears etc on them,, I'd like to get one , and in case one shows up,, I would know what to look for..thanks

Just to ask, what folks find works best loading a bx on a trailer, I picked up a 5x10 aluminum trailer. so would be loader and box blade hanging off it to save room. to give an idea of length

stopped at a Yanmar cub cadet dealer, and looked at the BX2360 competitor,, no comparison,, plastic fenders rusting already just not in the same league....

http://www.princessauto.com/pal/Miscellaneous-Surplus/12V-Reversible-Gear-Motor/8365298.p $4.99

did a piece on TBN as well. This weekend, I bought an ATV snow blade, ($200) after seeing the write ups on the BXpanded one.The front is attached by a piece of 1/4" x6" plate with a piece added to match the edge of the bucket, I added 2 bolts for now to the edge to hold it to the blade arms and...

http://www.golfcartsandaccessories.com/shop/universal-side-mirrors/ worked great ,,

Saturday must be idea day, I was looking at the ads for ATV plows , so I could use it hooked to an adapter for the quick attach like the BX25 uses. and making this kind of thing http://www.jariusa.com/ai2_products/BX_Series_Blank_Mount_Plate.html well tonight as I went by my 3 point 5ft...

There is a 120 led light on this week, I got one, great light from it, and it will be installed on my roll bar for a trial tomorrow. and its half price. at $19.99

http://datasheets.globalspec.com/ds/113/stafford/59E57240-378B-4DB1-8EB2-0A96A1E85DB9 I`m adapting an atv plow to our loader pins, welding these collars to some channel iron to accept the pins. they are $3.50 ea up here in Canada