Search results

If you're in need of replacement teeth for your WG24 Stump Grinder, here's an alternate source: Special (gabdon.com) I touched a piece of buried rebar while recently grinding and it instantly ruined 8 teeth. A set of 6 replacement teeth from Woodland mills is $124 with the $25 shipping charge...

After cutting & clearing a 700 ft. swath of brush, small trees, and a few larger trees along the back side of a row of pine trees, it was time to start grinding all the stumps. I bought a back up camera earlier but never really finished installing it as i only ground a few stumps at a time...

I should have done this at least 10 years ago but hopefully it will help prolong my stay that much more by saving my back. Working off of a creeper is getting much harder every year that goes by. This is a 9000 lb. 4 post Advantage lift. The extended model. After looking at most all the lifts...

Since it’s spring and there’s already talk of mower adjusting, I thought I’d share this: Last summer, a close neighbor was having troubles with his mid mount mower cutting an uneven swath. He’d adjust it to cut level on his flat areas but when mowing on a graded slope in one direction the cut...

Been living here 30 yrs and only a few years ago the wife was trudging through the thick part of the woods and found this giant cottonwood tree that had suffered a calamity of some sort during its youth, apparently. I thought lightning at first, but there's no hint of charring whatsoever...

Getting my snow blower rig ready for operation today I started thinking it would be wise to have a SMV sign mounted somewhere. Especially since I help take care of a few neighbor’s driveway that live nearby. And it’s getting harder to time the trip between driveways with the increased traffic on...

V.O.M.A.D. Meeting (Vintage Outboard Motor Acquisition Disease) Hello, my name is bird dogger and I haven’t bought a vintage outboard motor in over 5 months! I found out I had this common disease after my dad died and I rescued his old fishing boat from the barn where it had sat unused for...

My winter front grille and side covers for the new LX models are now ready to go. The new hood is taller and maybe a little wider than the hood for the former B2650/B3350 models so the covers are substantially larger and shaped a little different to match the new grill and side vent design...

A very recent Internet Service Provider change resulted in a new email address for me. After updating the change in my account I still get frequent notices that emails can not be sent to my new address and I have to reconfirm the change again. Until I reconfirm the change again, it prevents me...

Here’s a great little spot blaster that I use for quick rust removal and parts cleanup. The Zendex brand is made in the USA, I believe, and their website has replacement parts, etc., for them. And their shipping is extremely reasonable for those parts! I’ve used regular blasting media (fine)...

A mountain lion was sighted last week by a motorist in my immediate area. They were driving out of town to get a good look at the Neowise comet when this lion posed for their pic. They sent the pic to the State Game & Fish Dept., the local newspaper’s outdoors expert, and our township...

The past few weeks mowing in our high temps and humidity convinced me to finally fabricate a sun shade for the B2650. I also take care of a couple of lawns in different locations so wanted something easily removeable for trailering, working in treed areas, and for wintertime. That meant it had...

To keep my grapple inside the shop, upright, and easily accessible I made this custom dolly for it. It can be rolled out of the way when off and back up to the tractor when needed with just a light touch with four caster wheels underneath. David

And it’s FREE, so I thought I would share this for anyone interested. We’ve raised around 3 acres of sweet corn for far too many years. My new B2650 has no speedometer and I needed an accurate method to calculate the right spray application for some herbicides. Since corn is a member of the...

My 200 gallon fuel tank was in need of touching up and also had one small pin hole that I had temporarily patched with just a screw and rubber washer. Being empty it was time to give it a fresh paint job and a more permanent repair in place of that screw. I also have another older 300 gallon...

or temporarily misplaced it, anyway. EA's 55" Root Rake Grapple was shipped on March 31st. Three days later it was in St. Paul, MN. and looking good for a fast delivery time to Grand Forks, ND which is about 300 miles further northwest. But then it took a wrong turn and a day or two later...

can be hazardous to your health! This operator had been cleaning out a county drainage ditch with one track on the levee and apparently the other track on the hard packed snow in the ditch. The snow gave way and the rig slid down the steep bank. the operator was able to get out and had a very...

I decided to add a 3rd function kit to the tractor for an upcoming grapple addition. Since humans install them at the dealership, I figured I should be able to do the same in my shop and save a few dollars. Plus, with most everything shut down it provides something to do and a reason to get...

My son lives in Boise. Just heard Idaho had second largest recorded earthquake centered in the Stanley area. Hoping you, NIW, and other Idaho residents nearby are all ok!!! :eek:

I'm thinking of purchasing a loader grapple in the near future and unfortunately I wasn't looking forward enough when purchasing my tractor. I didn't have them install the 3rd function setup. My bad! :mad: Has anyone done the install themselves on the Kubota B2650 using the WR Long valve? In...