Search results

  1. J

    Kubota BX 25 Bucket hooks, are these any good ? which style?

    I am not spamming These are from my post on Tractor by net that someone had shown me.
  2. J

    Kubota BX 25 Want to add a thumb to BT601 Backhoe, Looking for advice.

    on the Ridge I did notice that it appears to be shorter. How do I add a Hydraulic thumb?
  3. J

    Kubota BX 25 Want to add a thumb to BT601 Backhoe, Looking for advice.

    Green that is what I am thinking Is not going to have a ton of stress for what this machine can do. I have no problem spending more if need be.
  4. J

    Kubota BX 25 Bucket hooks, are these any good ? which style?

    Bolt-On Hooks - BoltOnHooks LLC Bolt-On Hooks and other accessories for compact tractors. www.boltonhooks.com...
  5. J

    Kubota BX 25 Wheel spacers, Would either of these work? Bore size confusion.

    Hi, I am have been doing a lot of research and it appears people use both of these, I see one is 70.5 MM Bore and one is 71.5 MM Bore. It is not 100 % clear to me which is for the BX 25 as I see a lot posted about the BX 23. I am not sure if they use different sizes. Also Should I go with 1.5...
  6. J

    Kubota BX 25 Bucket hooks, are these any good ? which style?

    Kubota BX 25 I want to add Bucket hooks, are these good? which style? Thank you for the help. https://www.amazon.com/gp/product/B09Y8KWBWJ/ref=ox_sc_act_title_2?smid=A2HMJ5GT5TYLAE&psc=1 https://www.amazon.com/gp/product/B08TMH7VCC/ref=ox_sc_act_title_1?smid=A2HMJ5GT5TYLAE&psc=1
  7. J

    Kubota BX 25 Want to add a thumb to BT601 Backhoe, Looking for advice.

    Hi, I want to add a thumb to my BX 25, Ideally I would add a hydraulic one but I am unsure on cost and if it is worth it. I found this one, https://www.amazon.com/gp/product/B0732SFZQ4/ref=ox_sc_act_title_4?smid=A2OSE6G7MS58ZO&psc=1 I am open to other ideas as well. Any info on the hydraulic...
  8. J

    BX 25 Hazard/turn signals not working.

    Okay I see some models did, so the red lights on the fender are just regular driving light.
  9. J

    BX 25 Hazard/turn signals not working.

    Not a huge fan of electrical work, Hazards not working aren't that big of an issue for me, everything else appears to work, I haven't checked the brake lights as I just didn't think of it but I will.
  10. J

    BX 25 Hazard/turn signals not working.

    So they are Dual Filament? I have been researching and I can't confirm this. I'll down load the manual and make a donation.
  11. J

    BX 25 Hazard/turn signals not working.

    I don't have a manual for it and I have done a google search and haven't come up with anything. Are they dual or single filament bulbs that are supposed to be in it? Anyone know bulb model number? This forum seem to have a lot of knowledge, figured Id ask someone may have dealt with the same...
  12. J

    BX25 Question about rear rim and slighly egged mounting holes.

    Yeah I figured that, I'll take it off when i get a chance. I think if I just keep an eye on it'll be okay, This machine isn't doing any big jobs. I did add a washer to each, I used a softer washer that bent into the hole a little.
  13. J

    BX 25 Hazard/turn signals not working.

    Hi, I have a new to me BX 25 in nice shape, all the lights work except for the Hazard/Blinkers. They flash on the dash but not at the light. When I have the head light on all four bulbs in the back orange housing light up but nothing flashes, If the lights are off they don't flash either or...
  14. J

    BX25 Question about rear rim and slighly egged mounting holes.

    Hi, I just recently picked up a pretty clean BX 25 I believe it is a 2015. The previous owner did put new tires on and I noticed all of the rims were on the wrong way ( Spun around ) I got that corrected but I noticed one of the rear rims has 2 holes that are egged out and the other three appear...