Search results

  1. C

    Shear Pin Removal Issue

    Here are 4 images. The first two are with the auger spun 180 degrees. The other two are with the shaft rotated 180 degrees and the auger rotated 180 as well. https://photos.app.goo.gl/6N3LeYbMZMGuY2m57 https://photos.app.goo.gl/ozNpz9m4W2RSvf1V8 https://photos.app.goo.gl/nRAn7gYq4cY9WoXq6...
  2. C

    Shear Pin Removal Issue

    Yes, I understood what he meant. I've tried that and it didn't work.
  3. C

    Shear Pin Removal Issue

    I've tried it in both directions.
  4. C

    Shear Pin Removal Issue

    A shear pin snapped on my 50" front mount snow blower for my BX. I've changed many pins over the years but this time the hole for the shear pin is offset just enough so I can drive it out. The auger slides back and forth on the shaft but not enough for it to line up to drive it out. I'd...
  5. C

    DIY Snowblower Chute Rotator

    I am currently using a drill for chute rotation as well. I cut the handle off at the end and connect the drill to it. It works well but I'd prefer to use the hydraulics so I don't have to move my hand from the drill to the handle all the time.
  6. C

    DIY Snowblower Chute Rotator

    I have a BX1870 with the 50" snowblower. I would prefer to go hydraulic. This is a combo pump/motor. I'm guessing that should work...
  7. C

    DIY Snowblower Chute Rotator

    I'm thinking of building my own hydraulic chute rotator. I'm looking at this pump. https://www.northerntool.com/shop/tools/product_200641997_200641997&utm Will that work? Thanks, Andy
  8. C

    BX5450 Chain Question

    That's my thought as well but I didn't see any sign of movement on the shafts.
  9. C

    BX5450 Chain Question

    The chain came off the sprockets this weekend and when I put it back on the sprockets are offset. I don't see any evidence of the sprockets moving on the shafts. Is this offset normal?
  10. C

    PTO Selection Lever Stuck BX1870

    I'll do that today! Sent from my Fusion5_108 (16GB) using Tapatalk
  11. C

    PTO Selection Lever Stuck BX1870

    I have the operators manual. Thanks.
  12. C

    PTO Selection Lever Stuck BX1870

    I don't know. I'll have to look.
  13. C

    PTO Selection Lever Stuck BX1870

    I'll give that a try. I think I did try different throttle positions but I don't remember.
  14. C

    PTO Selection Lever Stuck BX1870

    The PTO selection is stuck in the rear PTO position. I put on the mowing deck yesterday and when I went to move the lever into the mid mount position it wouldn't move. I tried engaging and disengaging the PTO several times but it won't budge. Any help would be appreciated.
  15. C

    Hydraulic Chute Rotator

    Thank you!
  16. C

    Hydraulic Chute Rotator

    I have a BX2750 snowblower with a manual chute. Is there any reason I couldn't buy one of these and make a bracket to hold it? http://www.ebay.com/itm/NorTrac-Bi-Rotational-Pump-Motor-6-3-GPM-1-2in-Dia-Shaft-/331673669789?hash=item4d394a909d:g:zz8AAOSw9r1WEqgm
View older results
Top Bottom