Search results

The fuel shutoff solenoid was wired backwards. Got it back and it is running strong and starts right up.

Want to thank everyone with your help, I had to put it on the back burner for a minute and well I got out voted and the rest of the family thought it would get done quicker to have the local lawn and garden tractor repair take a look.

Well I tested the resistance, when in on position the wire that had resistance went and became an OL reading while the other wire had a low resistance. The solenoid when in the on position the armature did was held and did not release. Once turned off it did release the armature.

Thanks Henro for the info. I tried testing the two wires and I got voltage to one wire in the on position. Then starting the tractor it still maintain voltage. The second wire I tested in the on position no voltage. Then during start position it did show voltage. With the information you...

I had not even thought about walking the wire down from the ignition. Thanks for the thought.

Have a BX2200 that will not stay running. Only runs if you hold the key all the way to the right and once you let go it shuts off. First thing that was tried was to replace the fuel shut off solenoid since the original one blew the back open. Replaced and tried it still continued. After some...