yyri's latest activity
-
Yyyri replied to the thread B6000 rear axle seal and fan belt change.Thank you both, I'll buy the socket to fit the nut. I guess the nut is tightening when rotating the engine (clockwise viewing from...
-
YBuy the socket needed to turn the engine, for valve clearance check!
-
Yyyri reacted to Mountainman's post in the thread B6000 rear axle seal and fan belt change with
Like.
Once you remove that cover the seals just pop out and you can put new ones on. You'll have to drain transmission beforehand of course. -
YMy B6000 is dripping some oil from rear axle seals, both side (~2 liters over the winter parked in garage). I got seals from tracpartz...
-
-
Yyyri replied to the thread B7100 rear half on a b6000.Someone here had done it for b6000 with b7001 rear end...
-
YThe final product
-
Yyyri replied to the thread aftermarket 3 point hitch set up issues with b7000.I had same issue with my B6000, linkage arms would interfere with tyres. Previous owner had moved the check chains inside the lower link...
-
Yyyri replied to the thread Trouble finding pto shaft with shearbolt for B6000.Thank you all for the suggestions It has a pto reverser. Quick attach systems aren't really popular here and may be difficult to get. I...
-
-
Yyyri replied to the thread Trouble finding pto shaft with shearbolt for B6000.Mateng TL85 tiller and NEFL95 flail mower. Slip clutch would be a good consideration, as it could be adjusted, I'll check out those if...
-
Yyyri posted the thread Trouble finding pto shaft with shearbolt for B6000 in Implements & Attachments.I'm not finding small enough PTO shaft for rotary tiller and flail mowerfor my kubota. I live in Finland so it's a challenge for finding...
