Mountainman's latest activity
-
Mountainman replied to the thread Kubota d950 splined crankshaft adapter.Yes sir. This one is for a customer that put a d950 in a b7100 and still wants to use the front pump on his b219 loader. I was just... -
Mountainman posted the thread Kubota d950 splined crankshaft adapter in Service, Repair & Maintenance.Good morning. I don't have a part number but looking for the adapter to bolt onto the crankshaft pulley of a d850/d950 to give it a...
-
-
Mountainman replied to the thread bx 25 4wd.If you need any help with pictures or parts id be happy to help
-
Mountainman replied to the thread Kubota B and BX series salvage yard.Sorry i do not. I think we talked yesterday on the phone.
-
All mechanical injection Kubotas will start and run at the RPMs where the throttle is set. There should not be any rev up and settle to...
-
Mountainman replied to the thread Which BX25 is it?.Bx25 is a 60 series and bx25d is a 70 series. Only real difference is the brake pedal moved to the left on the bx25d. Your panel isnt...
-
Other reasons that could be why is not working. If the Flywheel has been turned. Bad pressure plate Disk bad (too thick) Wrong parts...
-
Mountainman replied to the thread New clutch wont release.Had a customer with same issue. Verified everything was correct and adjusted correctly. Ended up being a crack in the clutch fork...
-
Mountainman reacted to Runs With Scissors's post in the thread B8200 HST Incline stalling with
Like.
How steep of an incline? And are you pulling anything? The reason I ask, is that recently I was making a "sledding hill" for my... -
Mountainman reacted to North Idaho Wolfman's post in the thread B8200 HST Incline stalling with Like.
This in itself is not that unusual and not necessarily an issue. Could still be a mechanical clutch issue. Very unlikely a HST issue, as...
-
Mountainman replied to the thread B3030 and B2910 - same frame?.If you can find one the bh4974 subframe is made for the b7800 which should also work on the b2910 and works with the bh75 and bh77...
-
Mountainman replied to the thread B1550 Backhoe not working.You cannot put a tee in a pressure line. Fluid will always take the path of least resistance so youll have flow but no pressure. You...
-
Mountainman replied to the thread B7100 HST or B8200 gear for first tractor.B7100hst is considered live pto for the fact that you don't need the clutch to drive the tractor or switch gears. Gear drive version is not
-
Mountainman replied to the thread B8200 HST Incline stalling.If you can put a tiller or cutter on it and put it under load see if it works normal or if it stalls out. That'll help determine whether...
-
Mountainman replied to the thread B7100 HST or B8200 gear for first tractor.B8200 is a lot more tractor than the 7100. But hst is much better for loader work. If your going to do much loader work look for...
