Mountainman's latest activity
-
on stuff like that you sure want to pull the fenders and floors off and inspect everything above VERY well. The main source of leaks is... -
Thank you North Idaho Wolfman and Mountainman. I appreciate your help. Ordering the parts today - will begin studying the steering...
-
OK it is sorted. I checked the fuse box and nothing blown but pulled the starter solenoid 15amp and it was crusty pins so replaced that...
-
This tractor can be started and run with the dash disconnected and lying on the bench.
-
Mountainman replied to the thread B2110 INSTRUMENT PANEL REMOVAL.You have a valid point. In this case the panel is nothing more than a mechanical tach, couple lights and couple analog guages and short...
-
Mountainman replied to the thread B2110 INSTRUMENT PANEL REMOVAL.Yes it just pops out. Just be easy you don't want to break the bezel around it. Will it stay running if you hold the keyswitch in the...
-
Mountainman reacted to North Idaho Wolfman's post in the thread Kubota B2400 several leaks with
Like.
Since the heads are messed up get new plugs and O-rings: (1)qty 6C050-98350 (2)qty 6C050-98400 -
Mountainman replied to the thread Kubota B2400 several leaks.The 3 bolts are plugs on the hydrostat and yes there are orings there. Just remove and replace orings. The hole dont worry about nothing...
-
Mountainman replied to the thread Will BX1880 Hood fit on BX1860?.No it will not. 80 series is completely different in the hood area
-
Mountainman replied to the thread B6100 hyd pump.Agree with @North Idaho Wolfman you need to replace seals in your 3 point cylinder. If loader is working fine then hydraulic pump is...
-
Mountainman replied to the thread Should moderators be elected by membership?.Well this is fun!!! I have a Facebook group and moderating it and keeping scammers out and making sure everyone is behaving is a lot of...
-
Mountainman reacted to North Idaho Wolfman's post in the thread Should moderators be elected by membership? with Like.
I'm pretty sure your talking to me. I really want to know, what am I overly sensitive to? Enforcing the forum rules? Getting rid of the...
-
Mountainman replied to the thread B2400 won't move.Does it make any noise when trying to move forward or reverse? Clicking or grinding sound? Does it bog the engine or any noticeable...
-
Mountainman replied to the thread Need seat including hardware..Thank you sir
-
Contact @Mountainman who should be able to help See this thread for contact information (I think it is there)...