jiggseob's latest activity
-
Jjiggseob replied to the thread Hydraulic cylinder seal kits.Dan TheOldHokie, you are exactly correct. Putting seal kit into my bucket tilt cylinder was a waste of time and money.
-
Jjiggseob replied to the thread Hydraulic cylinder seal kits.The "near perfect match" of an off-the-shelf replacement cylinder, if one cylinder of an operating pair is replaced and the other not...
-
Jjiggseob replied to the thread Hydraulic cylinder seal kits.If the cylinder is only leaking oil to the outside, you should only require the rod-seal. If the cylinder leaks-down, as in the load...
-
Jjiggseob replied to the thread B1750 Clutch release bearing removal.You will have to press with a press or pull with a puller to get the inner race of that bearing off the holder. The clutch release...
-
-
Jjiggseob replied to the thread L3130 - suspected crankshaft damage - how to remove engine.Another update... injection pump stuck. The #3 plunger is not returning the same as the #1 and #2. And the rod that links the three...
-
-
Jjiggseob replied to the thread Damaged Loader... How best to repair?.Somersault the tractor.... the amazing part of those videos is the behaviour of the bystanders, in this case a person in the white...
-
Jjiggseob replied to the thread L3130 - suspected crankshaft damage - how to remove engine.Update.... back from Perth... 46C (114F) there for a couple days. Crank - main journals and crank-pins all ground 0.4mm under...
-
-
Jjiggseob replied to the thread Damaged Loader... How best to repair?.
-
Jjiggseob replied to the thread Damaged Loader... How best to repair?.I agree that the stress on a loader and tractor while "lifting" a load is one thing. Having a load unevenly distributed between the two...
-
Jjiggseob replied to the thread Damaged Loader... How best to repair?.My bothers L3540 is 200 miles away, impractial to show repair. My L3130 is apart in the shop, doing main and rod bearings. The loader...
-
-
Jjiggseob replied to the thread Damaged Loader... How best to repair?.Once the loader is off, I think those frame towers come off fairly easily, a bunch of big fine-thread metric bolts. A Milwaukee M-18...
-
Jjiggseob replied to the thread Damaged Loader... How best to repair?.I think you will find the twist in the loader frame tower that stays on the tractor after the loader quick-detaches. I saw that on my...
-
Jjiggseob replied to the thread B7100 Pilot Bushing Help - Grinding Gears.Is power being transmitted from the flywheel to the transmission input shaft while the clutch pedal is fully pushed in? It sure sounds...
