Am I stuck with R4’s?

L35

Well-known member

Equipment
L35/TL720/BT900/York rake/Valby chipper
Jun 13, 2010
545
447
63
CT
So my tires are about at the end of their life not due to wear but age/weatherchek/previous damage, etc. looking online i cant really find anything in my size but R4s. Am I missing something? I’d like R14s this go round but none of the major players seem to have my rear tire size.
sizes are;

front 27x10.5-15NHS
rear 15x19.5NHS
 

L35

Well-known member

Equipment
L35/TL720/BT900/York rake/Valby chipper
Jun 13, 2010
545
447
63
CT
My rims are good so really only need tires. For wheel size I have;

front 15x8
rear 19.5x12.25

I will have to poke around. I need to research further than that to compare outside diameters etc so I don’t tear up my 4WD.

more to follow.
 
  • Like
Reactions: 1 user

The Evil Twin

Well-known member

Equipment
L2501, LA526,
Jul 19, 2022
2,957
3,082
113
Virginia
You need to go by your wheel size and what tire size will be suitable for it.
My rims are good so really only need tires. For wheel size I have;

front 15x8
rear 19.5x12.25

I will have to poke around. I need to research further than that to compare outside diameters etc so I don’t tear up my 4WD.

more to follow.
You could give your local dealer a call and see what tires will be suitable for those wheel sizes.
What O&T was alluding to is that the whole good price is worth a complete wheel and tire is sometimes equal to or less than the retail cost of just tires + mounting.
 
  • Like
Reactions: 1 user

Orange man

Active member

Equipment
Kubota L2501 LA525 loader , woods prd6000 mower, Land pride RB 1672
Jul 23, 2014
198
107
43
WNY
titan makes the 15x19.5 in a r14, that is what came on my L2501
 
  • Like
Reactions: 1 users

jimh406

Well-known member
Lifetime Member

Equipment
Kubota L2501 with R4 tires
Jan 29, 2021
2,424
1,846
113
Western MT
From what I read a bit ago, the point of the R14s is to replace R1s or R4s. So, some company might make R14s, but it could be some work to find the right size to replace the R4s.

I'd try contacting tire manufacturers.
 
  • Like
Reactions: 1 user

Orange man

Active member

Equipment
Kubota L2501 LA525 loader , woods prd6000 mower, Land pride RB 1672
Jul 23, 2014
198
107
43
WNY
The new Titan trac loader II comes in the front size, it is a r4 but much better tread design
 
  • Like
Reactions: 1 user

jyoutz

Well-known member

Equipment
MX6000 HST open station, FEL, 6’ cutter, forks, 8’ rear blade, 7’ cultivator
Jan 14, 2019
3,159
2,193
113
Edgewood, New Mexico
Go to a local large truck and heavy equipment tire shop. They can source about anything in any size made.
 
  • Like
Reactions: 1 user

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
31,358
7,210
113
Sandpoint, ID
My bad, Must be the fronts I couldnt find. There’s a 27x8.5-15 but no 10.5
I'm pretty sure you can safely run these, they are just a little narrower:
You can go on goodyear and get the RC values and make sure.

 
  • Like
Reactions: 1 user

L35

Well-known member

Equipment
L35/TL720/BT900/York rake/Valby chipper
Jun 13, 2010
545
447
63
CT
The new Titan trac loader II comes in the front size, it is a r4 but much better tread design
I have trac loaders now, not the new design. They have held up well considering the abuse haha
 

L35

Well-known member

Equipment
L35/TL720/BT900/York rake/Valby chipper
Jun 13, 2010
545
447
63
CT
I'm pretty sure you can safely run these, they are just a little narrower:
You can go on goodyear and get the RC values and make sure.

I figure I can put those on my rims but was thinking they would be “straight up” from the bead, no bulge like I have now making the edge of the rim more vulnerable to damage. Thoughts?
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
31,358
7,210
113
Sandpoint, ID
I figure I can put those on my rims but was thinking they would be “straight up” from the bead, no bulge like I have now making the edge of the rim more vulnerable to damage. Thoughts?
If you want to keep the sidewall strength stay with the R4 and sipe the snot out of them!
That's what I would do with a TLB. ;)

Have @mcmxi show you his tires.
 
  • Like
Reactions: 1 user

McMXi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,593
6,782
113
NW Montana
If you want to keep the sidewall strength stay with the R4 and sipe the snot out of them!
That's what I would do with a TLB. ;)

Have @mcmxi show you his tires.
Here they are ... front and back. There are many examples on this forum of siped R4s but this is the direction I went in. Traction on snow and ice seems to be good.

mx6000_siping_4.jpg


mx6000_siping_5.jpg
 
  • Like
Reactions: 3 users

PoTreeBoy

Well-known member
Lifetime Member

Equipment
L35 Ford 3930
Mar 24, 2020
2,914
1,596
113
WestTn/NoMs
I figure I can put those on my rims but was thinking they would be “straight up” from the bead, no bulge like I have now making the edge of the rim more vulnerable to damage. Thoughts?
I don't think I'd want to go any narrower. Those little front tires leave ruts already.
 
  • Like
Reactions: 1 user

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
31,358
7,210
113
Sandpoint, ID
Those tires on mcmxi's ride, looks more like R14's than R4's!
They look awesome!
 
Last edited:
  • Like
Reactions: 3 users

Firedog

New member

Equipment
Kubota L2501
Oct 23, 2024
24
6
3
McKeesport
So my tires are about at the end of their life not due to wear but age/weatherchek/previous damage, etc. looking online i cant really find anything in my size but R4s. Am I missing something? I’d like R14s this go round but none of the major players seem to have my rear tire size.
sizes are;

front 27x10.5-15NHS
rear 15x19.5NHS
 

Attachments

Firedog

New member

Equipment
Kubota L2501
Oct 23, 2024
24
6
3
McKeesport
I had 60 hours on my R14 before I replaced them. Front only. How many hours did you get on your front tires ? My Amazon options were R4, nothing showed up on R14 search.
I see the max pressure is 60 psi. Do you run max pressure ?