What did you do to or on your Kubota today?

River19

Well-known member

Equipment
B2601, RB1560, BB1260 and BX2830 blower
Sep 10, 2020
334
552
93
NH/VT NEK
Actually a fairly enjoyable morning blowing snow......6 degrees but I'll take the trade off of having nice fluffy stuff to blow vs the heavy wet crap. 2601 worked well.

IMG_7333.jpeg


IMG_7340.jpeg
IMG_7339.jpeg
IMG_7337.jpeg
IMG_7335.jpeg
 

Attachments

  • Like
Reactions: 11 users

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,062
3,760
113
Wind Gap, PA
Saturday - Unloaded and stacked some large 4x4x8 hay bales for the neighbor. I'm told those bales weigh in at about 800 lbs. B2650 and forks made them a non-issue. I was able to get them into her garage and had just enough ceiling height to stack them 2 high. Put 2 bales out for the horses. It will now be another service I provide for the neighbor. I've been picking up some landscaping work from her (clearing job last fall, fence installation and routine mowing starting this year). She has a boat load of trees that need to come down as well and I'm trying to convince her to put a stone driveway in so that she can access the large barn.

last fall:

2 load.JPG


Day 2-5.JPG


Day 3 stump1.JPG


Sunday - plowed about 6" snow here and at my other new neighbors. They are a young couple in their first home. They don't have the "tools" that I do so I just do it to be neighborly.
 
  • Like
Reactions: 13 users

nerwin

Well-known member

Equipment
L2501, LA525, HLA Forks, Land Pride STB1072
Nov 13, 2024
238
374
63
Vermont
youtube.com
Saturday - Unloaded and stacked some large 4x4x8 hay bales for the neighbor. I'm told those bales weigh in at about 800 lbs. B2650 and forks made them a non-issue. I was able to get them into her garage and had just enough ceiling height to stack them 2 high. Put 2 bales out for the horses. It will now be another service I provide for the neighbor. I've been picking up some landscaping work from her (clearing job last fall, fence installation and routine mowing starting this year). She has a boat load of trees that need to come down as well and I'm trying to convince her to put a stone driveway in so that she can access the large barn.

last fall:

View attachment 146716

View attachment 146717

View attachment 146718

Sunday - plowed about 6" snow here and at my other new neighbors. They are a young couple in their first home. They don't have the "tools" that I do so I just do it to be neighborly.
dang that's a good size stump!
 
  • Like
Reactions: 1 user

nerwin

Well-known member

Equipment
L2501, LA525, HLA Forks, Land Pride STB1072
Nov 13, 2024
238
374
63
Vermont
youtube.com
Yes, it was. And plenty more like it.
It's really satisfying seeing stumps removed. I need to do that this year, I have these sapplings that are invasive and they turned into this huge cluster of stumps. You cut them, month later they are 7 feet tall again haha.
 

WI_Hedgehog

Well-known member

Equipment
BX2370 (impliment details in my Profile->About)
Apr 24, 2024
430
457
63
Milwaukee, Wisconsin, U.S.A.
So pretty soon we will read in this thread:
"do you a magic trick, painted what's left of your flexi robot into a majestic green entity, used bubblegum meticulously to adhere new badge, and join a John Deere forum to share your great realm and sit you back with popcorn witness magic hard for long time. Then your cheap bolts break."

🤣
 
  • Haha
  • Like
Reactions: 2 users

Old_Paint

Well-known member
Lifetime Member

Equipment
LX2610SU, LA535 FEL w/54" bucket, LandPride BB1248, Woodland Mills WC-68
Dec 5, 2020
1,763
1,787
113
AL
Yeah, that could have been bad. My quick nija reflexes helped out!
Just don’t try Ninjy kicks and Judy chops at the same time. You’ll cut your leg clean off. So says I.
—Diamond Dave, Redneck Ninja
 
  • Haha
Reactions: 1 user

Old_Paint

Well-known member
Lifetime Member

Equipment
LX2610SU, LA535 FEL w/54" bucket, LandPride BB1248, Woodland Mills WC-68
Dec 5, 2020
1,763
1,787
113
AL
Saturday - Unloaded and stacked some large 4x4x8 hay bales for the neighbor. I'm told those bales weigh in at about 800 lbs. B2650 and forks made them a non-issue. I was able to get them into her garage and had just enough ceiling height to stack them 2 high. Put 2 bales out for the horses. It will now be another service I provide for the neighbor. I've been picking up some landscaping work from her (clearing job last fall, fence installation and routine mowing starting this year). She has a boat load of trees that need to come down as well and I'm trying to convince her to put a stone driveway in so that she can access the large barn.

last fall:

View attachment 146716

View attachment 146717

View attachment 146718

Sunday - plowed about 6" snow here and at my other new neighbors. They are a young couple in their first home. They don't have the "tools" that I do so I just do it to be neighborly.
It looks a lot warmer in PA than it does in AL. The grass is so green in your photos. Our lawn has been dead for weeks now (well, the parts that still have grass, anyway). We had about 5 inches of snow last week and the temperature is dropping like a stone tonight down to 11F. I think the Canucks left the back door open again. Sub freezing temperatures for 4 days in a row in AL is definitely a climate change, but it blows the global warming idea out of the water (or ice as the case may be). We’ve had a soggy few weeks and some hard freezing to go with it, so most of the yard is mud.
A neighbor had some very overcrowded conditions with a little chicken tractor that he bought for 8 chickens (too many) and he and his wife wound up doing too much chicken math which resulted in 12 birds in a coop that never should have had more than 4 in it. He has very limited carpentry skills and apparently little chicken expertise, so I volunteered to help solve the problem. Turns out his poor birds also had a mite infestation and are missing way too many feathers for our current weather situation. So I jumped through hoops while the weather was warm and built enough 4-foot wide panels for a 16x8 pen and relocated an old rabbit hutch he had to get his birds out of the tiny infested coop. We clad the rabbit hutch with OSB, and put a tin roof on it and then erected the pen around it so they now have at least 4x the space they had, both in the run and the coop.
In that project, I managed to make some serious ruts in his yard that was very soggy after last week’s snow and heavy rain on Friday night. Handling the rabbit hutch on my clamp on forks sunk the front wheels nearly halfway in the ground and the rear wheels were at least 10 inches deep in the mud I stirred up.
But, we managed to produce twelve wall panels and four roof panels that make up the 16x8 pen in 2 days and constructed the pen in about 4 hours, not including the time to modify the rabbit cage. The temperature was 28F last night by the time we finished treating the birds and transferred them to the new pen. They were pretty excited about having room to get away from each other after spending their entire lives in a tiny 4x8 enclosure. His birds are twice the age of mine, but less than half the size and body weight. He understands a lot more about chickens than he did before when we compared them to our own chickens and how they were raised and cared for. Ours get more attention than I do. We started with 6, lost one that decided to dehydrate itself and then got 3 more to make up for the loss, and 2 of 2 Rhode Island Red “pullets” had a gender crisis and started crowing, leaving us with 6 egg producers and 2 chronologically challenged noise makers as big as turkeys. Our (unplanned) roosters are big boys and get a little confused about pecking order thinking they can intimidate me. They get regular lessons about the advantages of opposing thumbs and higher intelligence, yet still haven’t figured out Darwinian theory. Kinda funny actually when they do their little sideways dance to give me attitude.
 
  • Like
Reactions: 1 users

Kennyd4110

Well-known member
Vendor Member
Sep 7, 2013
1,259
490
83
Westminster, MD
www.boltonhooks.com
Good day.

The cab looks toasty!

What are you using for tool holder in the QH? (Looks like you got something holder the scoop shovel?). What are the tools holders make / model? TYIA.

Cheers.
Very toasty!

I have our chainboxes on the quick hitch, then a a new set of tool mounts from PAC I am testing out holding my shovel. The Quick Fist clamps we currently sell work good, but these so far are working GREAT.
 

Attachments

  • Like
Reactions: 5 users

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,412
5,016
113
North East CT
I went out around 7:30 AM and started blowing snow. It was about 7 degrees outside and the Kubota started without any problems after being plugged in all night. When I got all the snow off the driveway it was 10:30 and I came back to the house to remove the blower and install the plow. Got the plow on without any problems but couldn't get the couplers to seat. I put them in front of the exhaust and it was enough to get them to seat. I ran the plow up one side of the driveway and back down the other to clear the snow that the snowblower didn't remove.
I checked the snowblower earlier this evening and it is a frozen block of ice. Should have removed all the snow from it before it froze. We aren't expecting more snow for a while so it will have some time to thaw.
MVC-020L.JPG
 
  • Like
Reactions: 4 users

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310
Jun 17, 2020
1,133
2,303
113
PEI Canada
Very toasty!

I have our chainboxes on the quick hitch, then a a new set of tool mounts from PAC I am testing out holding my shovel. The Quick Fist clamps we currently sell work good, but these so far are working GREAT.
The chainbox is a great addition to the tractor.

20230507_143313.jpg

20230507_143318.jpg
 
  • Like
  • Love
Reactions: 5 users

mdhughes

Well-known member
Lifetime Member

Equipment
L3901DT
Dec 10, 2014
1,271
806
113
Ste Geneveive county, MO
It was a little cold here this morning, i recorded -1F at 06:45. I waited till if got in the 20's before I went out to work on firewood. The L3901DT didn't want to trun over fast enough to start, so I took one of the batteries out of my Ram and jumped it. Got it running and worked on moving some logs. Fell a small Oak and got 3 80" logs out of it. Not a lot of firewood, but it was standing dead. Don't have any pictures.
 
  • Like
Reactions: 1 users

forky

Well-known member

Equipment
L2501 HST 4X4 8N
Feb 23, 2021
276
284
63
Wisconsin
It looks a lot warmer in PA than it does in AL. The grass is so green in your photos. Our lawn has been dead for weeks now (well, the parts that still have grass, anyway). We had about 5 inches of snow last week and the temperature is dropping like a stone tonight down to 11F. I think the Canucks left the back door open again. Sub freezing temperatures for 4 days in a row in AL is definitely a climate change, but it blows the global warming idea out of the water (or ice as the case may be). We’ve had a soggy few weeks and some hard freezing to go with it, so most of the yard is mud.
A neighbor had some very overcrowded conditions with a little chicken tractor that he bought for 8 chickens (too many) and he and his wife wound up doing too much chicken math which resulted in 12 birds in a coop that never should have had more than 4 in it. He has very limited carpentry skills and apparently little chicken expertise, so I volunteered to help solve the problem. Turns out his poor birds also had a mite infestation and are missing way too many feathers for our current weather situation. So I jumped through hoops while the weather was warm and built enough 4-foot wide panels for a 16x8 pen and relocated an old rabbit hutch he had to get his birds out of the tiny infested coop. We clad the rabbit hutch with OSB, and put a tin roof on it and then erected the pen around it so they now have at least 4x the space they had, both in the run and the coop.
In that project, I managed to make some serious ruts in his yard that was very soggy after last week’s snow and heavy rain on Friday night. Handling the rabbit hutch on my clamp on forks sunk the front wheels nearly halfway in the ground and the rear wheels were at least 10 inches deep in the mud I stirred up.
But, we managed to produce twelve wall panels and four roof panels that make up the 16x8 pen in 2 days and constructed the pen in about 4 hours, not including the time to modify the rabbit cage. The temperature was 28F last night by the time we finished treating the birds and transferred them to the new pen. They were pretty excited about having room to get away from each other after spending their entire lives in a tiny 4x8 enclosure. His birds are twice the age of mine, but less than half the size and body weight. He understands a lot more about chickens than he did before when we compared them to our own chickens and how they were raised and cared for. Ours get more attention than I do. We started with 6, lost one that decided to dehydrate itself and then got 3 more to make up for the loss, and 2 of 2 Rhode Island Red “pullets” had a gender crisis and started crowing, leaving us with 6 egg producers and 2 chronologically challenged noise makers as big as turkeys. Our (unplanned) roosters are big boys and get a little confused about pecking order thinking they can intimidate me. They get regular lessons about the advantages of opposing thumbs and higher intelligence, yet still haven’t figured out Darwinian theory. Kinda funny actually when they do their little sideways dance to give me attitude.
Kudos for you helping out the neighbor and his flock! I've been raising chickens since 1973 and provide them with great housing, feed, treats, and attention. It really does make a difference in the flock's health. I enjoy hearing stories where the birds are given the respect they deserve.
 

nerwin

Well-known member

Equipment
L2501, LA525, HLA Forks, Land Pride STB1072
Nov 13, 2024
238
374
63
Vermont
youtube.com
Very toasty!

I have our chainboxes on the quick hitch, then a a new set of tool mounts from PAC I am testing out holding my shovel. The Quick Fist clamps we currently sell work good, but these so far are working GREAT.
That's a good idea. I like it. I don't have a quick hitch but been trying to find a way to easily carry shovels and rakes. So far it's just throwing them in the bucket haha
 
  • Like
Reactions: 1 user

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
31,178
7,118
113
Sandpoint, ID
That's a good idea. I like it. I don't have a quick hitch but been trying to find a way to easily carry shovels and rakes. So far it's just throwing them in the bucket haha
Get a Quick Hitch and a Carry all, you'll really like it!
 
  • Like
Reactions: 3 users

Siesta Sundance

Well-known member
Lifetime Member

Equipment
L305DT, MX 5200, SVL 75-2, (Sold M7060))
Oct 23, 2022
1,652
2,155
113
78125
youtube.com
South, Texas this morning, and this is utter Bull chit weather. 2 days ago it was in the 70's and peach trees were blooming.

With my approval I told the weather gods to bless those way up north with our 120+ degrees heat index days this upcoming summer.

20250121_070824.jpg
20250121_070847.jpg
 
  • Wow
  • Like
Reactions: 2 users

Moose7060

Well-known member

Equipment
M7060, L3902 HST, Farm King PT740, HLA 2500 Snowpusher, LandPride RCR1872
Oct 14, 2023
653
1,554
93
bc
South, Texas this morning, and this is utter Bull chit weather. 2 days ago it was in the 70's and peach trees were blooming.

With my approval I told the weather gods to bless those way up north with our 120+ degrees heat index days this upcoming summer.

View attachment 146756 View attachment 146757
Bahahaha. I'm sending you some long underwear. Don't worry about the stains.
 
  • Haha
  • Like
Reactions: 4 users