Loader controls not working

[BSpeers]

Morning folks
Last week I blew one of the steel hydraulic lines that feed the loader. Got 4 new lines & installed them. Now i cant get the loader boom or bucket to actuate.
Tractor was working fine prior to this
Any thoughts?

 

[TheOldHokie]

Morning folks
Last week I blew one of the steel hydraulic lines that feed the loader. Got 4 new lines & installed them. Now i cant get the loader boom or bucket to actuate.
Tractor was working fine prior to this
Any thoughts?

Simple - you dont have it hooked up correctly

Provide the model numbers of the tractor and loader along with a picture or two of the new lines and I could probably expound on that.

Dan

 

[BSpeers]

Simple - you dont have it hooked up correctly

Provide the model numbers of the tractor and loader along with a picture or two of the new lines and I could probably expound on that.

Dan

Thanks Dan, that may well be the case
I may have replaced one of the lines in the wrong spot. Finding the new order is driving me bonkers. Will try to figure it out again
Thx

 

[TheOldHokie]

Its pretty simpke. Post pictures and you might get some help.

Dan

 

[BSpeers]

Simple - you dont have it hooked up correctly

Provide the model numbers of the tractor and loader along with a picture or two of the new lines and I could probably expound on that.

Dan

Hi Dan
I figured out the connection locations but still had my bucket curl but wouldnt go diwn. When I broke the tractor a quick coupler blew inside and wouldnt let the fluid flow back through. A new coupler fixed it
Really appreciate your help getting it back in good working order
Thank you
Brian