Weight

[AM28]

Quick, easy, cheap, doesn’t interfere with the 3pt. Quick and easy to add or remove.

 

[RCW]

Guessing close to 300 pounds?

Certainly looks like it’ll do the job!

 

[The Evil Twin]

I seriously considered using rotors myself. Did the brakes on the truck and had four 50-60 lb rotors sitting there.

 

[AM28]

Guessing close to 300 pounds?

Certainly looks like it’ll do the job!

Square tube out of the frame receiver, welded round pipe into it, filled the tube and pipe with rebar, total weight is 317. I could put two more rotors, if I had them, on the piece I built. I could hang more off of the three-point if I need it.

 

[jimh406]

Looks pretty good, but you should have had of the BMW showing. At least, I think that's what it is.

 

[AM28]

Looks pretty good, but you should have had of the BMW showing. At least, I think that's what it is.

Wow, good eye/identification - 1150 RTP

 

[RichardAaronlx2610]

Gotta get a nice shiny drilled/slotted rotor for the top of the stack

 

[AM28]

Wow, good eye/identification - 1150 RTP

Ok .. I was very impressed by your identification .. I call this the fun side of my shop .. see what you can do with it

 

[jimh406]

Ok .. I was very impressed by your identification .. I call this the fun side of my shop .. see what you can do with it

I'm not going to be as good with the rest, but I rode a 1100RT for about a decade.