No regen yet

[Peeps]

I bought a new L3902 this summer and now have 47 hours on it. It’s been used for a lot of grapple work running at 2100 rpms and some stump grinding at pto speed. Most of the time I run it for hours and the weather has been hot during use. I haven’t had a regen yet. Should I be concerned about that?

 

[Bmyers]

I bought a new L3902 this summer and now have 47 hours on it. It’s been used for a lot of grapple work running at 2100 rpms and some stump grinding at pto speed. Most of the time I run it for hours and the weather has been hot during use. I haven’t had a regen yet. Should I be concerned about that?

Nope.

The higher RPMs and PTO RPMS (which are higher) you most likely are keeping everything burnt off or adding minimal amount.

Cold weather, you have idle time to let the tractor warm up, you may not be using the PTO as much, so the DPF will get clogged sooner due to less heat.

So far this summer, I have regenned one time. Winter time, I regen more often.

 

[Vlach7]

Just curious, my L47 has a display screen that lets me know what percentage I'm at so I can anticipate the regen timing, does yours?

 

[TheOldHokie]

I bought a new L3902 this summer and now have 47 hours on it. It’s been used for a lot of grapple work running at 2100 rpms and some stump grinding at pto speed. Most of the time I run it for hours and the weather has been hot during use. I haven’t had a regen yet. Should I be concerned about that?

No - thats about how my L3901 behaves in that usage. I would be expecting one soon.

Dan

 

[mdhughes]

Just curious, my L47 has a display screen that lets me know what percentage I'm at so I can anticipate the regen timing, does yours?

Unless they added it for the L3902, no it does have anything like that. I have a L3901 and it doesn't have it.

 

[MotoBBQ]

56hrs on my L3902, same type of use. No regens yet. I'm expecting around 75hrs from what I've read on here.

 

[SDT]

Just curious, my L47 has a display screen that lets me know what percentage I'm at so I can anticipate the regen timing, does yours?

L3902 does not.

 

[jyoutz]

I bought a new L3902 this summer and now have 47 hours on it. It’s been used for a lot of grapple work running at 2100 rpms and some stump grinding at pto speed. Most of the time I run it for hours and the weather has been hot during use. I haven’t had a regen yet. Should I be concerned about that?

The first regen on my tractor was at around 70 hours.