FAB Tools

[drygulch]

My favorite tool is my evolution 15 inch cold cut saw. Perfect cuts in soft steel shapes with no sparks or heat. https://store.evolutionpowertools.com/products/evosaw380
Also love my chip pick up tool https://store.evolutionpowertools.com/products/mcc390

I've had an Evolution on my list for a long time. Would (er, will) be a nice addition for sure.

Hard to say what is favorite or most indispensable, but my belt grinder is way up the list.

 

[drygulch]

My hobby is being self sufficient.

Good practice for when it's necessary.

 

[North Idaho Wolfman]

Mine cuts 4 x 4 x 1/4 wall steel tubing like butter with perfect cuts unlike my bandsaw that would take 15 minutes for the same cut. Have an aluminum cutting blade for it also. If you deal with scrap shapes it's a great tool. I use an abrasive saw for hardened steels but that makes sparks and a big mess.
The magnet is nice because I just hold it over a garbage can and pull the handle that allows the chips to fall right off.

I have the Evolution S380CPS – Heavy Duty 15 Inch Metal Cutting Chop Saw and the
Evolution S210CCS 8-1/4" Heavy Duty Metal Cutting Circular Saw and a Lotos LTP7000 70Amp Plasma cutter.

All of them work incredibly well!

 

[drygulch]

I have the Evolution S380CPS – Heavy Duty 15 Inch Metal Cutting Chop Saw and the
Evolution S210CCS 8-1/4" Heavy Duty Metal Cutting Circular Saw and a Lotos LTP7000 70Amp Plasma cutter.

All of them work incredibly well!

Ever need to sharpen or replace the Evolution blades?