D1105, Pistons all have a Letter "C" stamped into the top of them. Any significant meaning for this? Bores all appear to be standard size.
Does Kubota mark their pistons with the oversize as most others do?
The rings on this one are stuck in the pistons- big time. Rather than fight them out and take a chance on really damagine a piston ring land, I'm going to replace pistone, rings and rod bearings. Bearings look new and are not marked with OS or US, Still have to measure the crank.
Does Kubota mark their pistons with the oversize as most others do?
The rings on this one are stuck in the pistons- big time. Rather than fight them out and take a chance on really damagine a piston ring land, I'm going to replace pistone, rings and rod bearings. Bearings look new and are not marked with OS or US, Still have to measure the crank.