What caused this to lose its shape. Found the picture when looking at another website. Tractor looked fine, just the tank caught my eye.
BX Radiator Overflow Tank
- Thread starter DustyRusty
- Start date
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
JimDeL
Well-known member
Lifetime Member
Equipment
BX2380; R4 tires; 54" MMM; FEL w Pirahna bar; Ballast Box; BXpanded skid plate.
Vacuum would do it, but the hose from the rad would have to fit a lot tighter than the one on my BX2380 does, plus the vent would have to be plugged, too.
I suspect some significant heat was involved as well.
RCW
Well-known member
Lifetime Member
Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
I zoomed the loom...just wide flat tape not heat damage
NOT fire related as no flame or smoke damage
If 'heat' the container would expand or be smooth not the 'indents' we see.
NO coolant in the tank,no sign it left either..
it is a mystery but vacuum seems the best choice.
NOT fire related as no flame or smoke damage
If 'heat' the container would expand or be smooth not the 'indents' we see.
NO coolant in the tank,no sign it left either..
it is a mystery but vacuum seems the best choice.
Kubota sent me a new cap back in 2018 for a BX2370 I owned. It was a fix (service bulletin) for a venting issue of the recovery tank cap. Maybe someone didn’t get the memo.