Has anyone had a stabilizer leg hydraulic fitting separate at the 90 deg angle? Looks as if it was pressed together rather than being one piece
?
L35 Fitting Failure
- Thread starter BELLSHIREGUNS
- Start date
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Interesting. Did it just blow off when you lowered the stabilizer?
Do you have any other pics such as the part that blew off?
Do you have any other pics such as the part that blew off?
No blow off. I was in the process of removing the hose and it separated with very little resistance. FYI I am restoring this tractor after acquiring it from an estate as a free tractor if you can get it off the property. Unfortunately it set idle for 15 years, so I have my work cut out for me.
I spent about 3 years restoring mine from the ground up. The L35 TLB is a nice machine.
I've posted a lot of stuff on here as tbe restoration progressed. Many others have too so look around.
I've posted a lot of stuff on here as tbe restoration progressed. Many others have too so look around.
fried1765
Well-known member
Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
All the Kubotas that come from the factory as TLBs really seem to be overbuilt. I’m never underwhelmed by mine, hopefully parts stay available for a long time so I can continue to enjoy it.
