Ktrim
Well-known member
Equipment
B2400, lA352 loader,3pth quick hitch/z122r zero turn/restored 52 farmall super a
I finished repairing my 3pth hydraulics on b2400. New control valve, new seat poppet and spring in relieve valve. I measured the shims that came out and replaced with new. Actually have slightly less shim now than was in there.
My question is the relieve valve is popping at 2000psi. Factory specs say 1920 to 1991 psi. Will this be ok or should I try different shims?
Keith
My question is the relieve valve is popping at 2000psi. Factory specs say 1920 to 1991 psi. Will this be ok or should I try different shims?
Keith