New profile posts

What's new New posts New media New media comments New profile posts Latest activity
cstempert
Michael
I have an L185DT, I beleive the same tractor as the L1801. Do you have any pictures of the FEL on yours. Mounting to the gearbox etc. deetails on the FEL etc. I am looking to add an FEL to my tractor but haev been coming up bust with a sure fire kit.

Thanks.
K
Hi Vic
I've just purchased an L2950 GST 4WD c/w Allied loader with 810 Hrs on hour meter.
The steering seems very loose and slow to respond. Not good near bldgs and other obstacles.
Of the 3 main steering components, I'm going to replace the pressure relief valve on the steering column controller first, as it would be the cheaper of the other parts to check. Am I correct in my thinking or is there another route I should be taking?
Keith
C
Hi Vic I am after 2 connecting rods for a ZL600 motor (15231-22012) thanks Craig.
O
Go to Kubota Corporate site ( www.kubota.com) and look at Grey market list and then look at the obsolete Kubota model by year and compare to a Kubota model and try your lock at OEM clutch. Get size, thickness and hub center spline count when replacing, good luck wish I knew more but I don't....
S
I have a Model B219 (serial #1842) loader on my B7100 Kubota. My research indicates that there should be a "float position" when the control lever is pushed past the down position. I assume it should have a detent at that point. In my case there is no detent, the handle just returns to the nuetral position. And the loader does not seem to float.
However, I have not given it a test in the forward direction, I have only tried it in reverse.
The control valve appears to be original. Although I have no way of knowing for sure.
Question is: Am I correct in assuming there should be a detent? Based on the way the instruction reads; "The lever must be returned to the nuetral position manually"

Any information on this condition would be greatly appreciated.
Thank You!
O
Get a hold of Tim Honeycutt at Carver Equipment in Dunn, NC if anybody can help you its Tim... Google Carver for number..
S
Hi,

I have had a Kubota B1200 since 1996, unaware of grey market back then. This tractor has been great. Recently developed problem with clutch. Is there a US model that this
model may cross to for clutch parts? Thanks in advance for your help.

Skipk
S
Hi Vic,
I am a newbe, Just purchased a B7100 with model 219 loader. Have many questions, But, my first is: The oil light stays lit even after engine starts the fellow I bought it from said "it always does that". But owners manual I aquired says it should go off. Question is; Is the sending unit a normally "closed/ held open switch" or opposite? and, are the sending unit's threads such that a pressure gage can be easily attached with a gage from an after market store?
Thank you. (Your site is great for people like me!)
S
I have 1 that i got for the B7100 from ebay shoot me a email address and I'll send it to you and you can make up your mind. My e mail is kathy.howe@sbcglobal.net
eserv
Hi Vic
Can you get parts for a Bolens G154? They are built by Iseki. I have one, Had it for years now, been an excellent tractor and still doesn't need any parts but I need a source if it ever does!
Ed
L
Same situation as you are in rwroper. Can u hook us up Vic? Also looking for the caution(?) lights that are attached to each side fender.
eserv
Hello Vic
Are you coming yo get this Yanmar? Customer has told us you are.
Ed
R
Hey Vic, I have been blessed with an L1500 (grey market)... The tractor seems to be pretty solid as I have made a few minor cosmetic repairs. My main issue at this point is the electrical system. There are several wires in the harness that are burnt in two and several others that are disconnected. Does anyone have a link to a wiring diagram for the L1500 or L175 so that I acan rebuild the harness?
R
I have been blessed with an L1500 (grey market)... The tractor seems to be pretty solid as I have made a few minor cosmetic repairs. My main issue at this point is the electrical system. There are several wires in the harness that are burnt in two and several others that are disconnected. Does anyone have a link to a wiring diagram for the L1500 or L175 so that I acan rebuild the harness?
B
Need info on rear tires of a grey market kubota size of the tire are 9.5 X22 were can i find some . thnks for any help or info
Y
Hey Vic My question is i am a proud owner of a B2320 tractor a am not at 50 hrs yet but am wondering when changing the HST fluid does this modle have a metal partical screen If so where is its location.
D
Did you get your hydralic problem fixed? I'm having same problem, new filter didn't help. Hoping the pump not going out.
Top Bottom